Coil Winder

Advert

New Replies

Report Bug

Help/FAQs

Coil Winder

This topic has 10 replies, 7 voices, and was last updated 5 January 2023 at 17:13 by Graham Titman.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
4 January 2023 at 16:05 #30996
john fletcher 1
Participant
@johnfletcher1
Advert

4 January 2023 at 16:17 #627565
bernard towers
Participant
@bernardtowers37738
available as a kindle book for less than £4
4 January 2023 at 16:22 #627567
David Jupp
Participant
@davidjupp51506
Camden has it on their web site, but showing 'currently sold out'.
4 January 2023 at 19:30 #627584
Andrew Tinsley
Participant
@andrewtinsley63637
Lindsay have ceased publishing. So either a secondhand copy or a Kindle version is the best you will be able to do.

Regards,

Andrew.
5 January 2023 at 12:39 #627664
Graham Titman
Participant
@grahamtitman81812
John Fletcher1 you have a pm
5 January 2023 at 12:52 #627667
john fletcher 1
Participant
@johnfletcher1
Nothing has arrived in my in box Graham and thank to others who responded to my request. John
5 January 2023 at 12:58 #627671
Graham Titman
Participant
@grahamtitman81812
I have tried again John

Edited By Graham Titman on 05/01/2023 12:59:18
5 January 2023 at 13:09 #627675
Ramon Wilson
Participant
@ramonwilson3
John – I have in ,my possession a coil winder made by an eminent model engineer of his day – one Ernie Shaw. I worked with his son Martin who passed it to me long after his father had passed on.

If I remember the story correctly it was made for making coils to manufacture scale electric motors for a scale model tram as a result of differing opinions in the ME of the time of whether it could be done. Possibly pre war I would think. I believe it was a successful project and I think his main protagonist was none other that Edgar Westbury but you would need to see the ME's to verify that

My engineering days are coming to an end so if you would like it it's yours. It was given to me so the same goes – the only caveat that once you are finished with it I'd like to think you would pass it on to anyone similar should the same situation arise.

Send me a pm with your address if you are interested

Best – Tug

Edited By Ramon Wilson on 05/01/2023 13:11:33
5 January 2023 at 15:16 #627690
Mike Poole
Participant
@mikepoole82104
I am very sorry John, I was tidying up a couple of double posts in the thread and my fat finger deleted your original request for the Gingery coil winder. It has rather spoiled the post as I zapped your original request. I don’t think it can be recovered once deleted but perhaps you could post again your original request in this thread and mention that an idiot moderator took out the starting post.

Mike
5 January 2023 at 17:13 #627710
Graham Titman
Participant
@grahamtitman81812
Sorry all my fault
5 January 2023 at 17:13 #627711
Graham Titman
Participant
@grahamtitman81812
Sorry all my fault
Author

Posts