3 way toolpost

Advert

New Replies

Report Bug

Help/FAQs

3 way toolpost

This topic has 18 replies, 6 voices, and was last updated 27 May 2022 at 11:26 by Mark Smith 3.

Viewing 19 posts - 1 through 19 (of 19 total)

Author

Posts
27 May 2022 at 08:19 #30805
Mark Smith 3
Participant
@marksmith3
Advert

27 May 2022 at 08:45 #599487
SillyOldDuffer
Moderator
@sillyoldduffer
~~Please do not post here – this duplicate thread will be deleted.~~

Edited By SillyOldDuffer on 27/05/2022 11:21:45
27 May 2022 at 08:50 #599488
Mark Smith 3
Participant
@marksmith3
Sorry I'm not sure how that happened.
27 May 2022 at 09:02 #599489
DC31k
Participant
@dc31k
It's a three way toolpost, so what is more natural than one thread per way?
27 May 2022 at 09:06 #599490
Mark Smith 3
Participant
@marksmith3
Funny, as I said I don't know how that happened I only posted one.
27 May 2022 at 09:20 #599494
Michael Gilligan
Participant
@michaelgilligan61133
Dare I ask … Has Dave deleted the wrong thread ?

MichaelG.
27 May 2022 at 09:22 #599495
Mark Smith 3
Participant
@marksmith3
The third one down seems to have the correct one. I'll check.
27 May 2022 at 09:22 #599496
Mark Smith 3
Participant
@marksmith3
The third one down seems to have the correct one. I'll check.
27 May 2022 at 09:27 #599498
Mark Smith 3
Participant
@marksmith3
It appears it has been deleted
27 May 2022 at 09:29 #599500
Michael Gilligan
Participant
@michaelgilligan61133
.

Current status ^^^

… which is why I asked the question

MichaelG.

Edited By Michael Gilligan on 27/05/2022 09:30:50
27 May 2022 at 09:34 #599501
Mark Smith 3
Participant
@marksmith3
The gist of the post is I made a 3 way tool post from a design I found in a ME magazine No. 299 December 2020. It is a very good design as it doesn't have sharp bits pointing at the operator. Also I want to know if anyone else a has made one and what they think of it.

I would have liked to add a photo but I can't remember how.
27 May 2022 at 09:38 #599502
Michael Gilligan
Participant
@michaelgilligan61133
Start here, Mark : **LINK**

https://www.model-engineer.co.uk/forums/postings.asp?th=103028&p=1

MichaelG.
27 May 2022 at 09:38 #599503
Hopper
Participant
@hopper
That would be the Lamas (Lammas?) toolpost I presume. I have always liked the look of them but never got around to making one. Always wondered about not being able to fit a facing tool or boring bar in them "wrong way round". How do you deal with that?
27 May 2022 at 09:45 #599505
Mark Smith 3
Participant
@marksmith3
Thank you Michael I'll do that.

As to the boring bar problem Lammas says to make more than one. The other is upside down with respect to the first.
27 May 2022 at 11:09 #599513
ega
Participant
@ega
Assuming that the thread is indeed open:

The feature of the Lammas toolpost that appeals to me is the ability to get the tool tip close to the back centre.

My standard toolpost is the GHT four-way on which I have rarely if ever stabbed myself.
27 May 2022 at 11:14 #599515
Mark Smith 3
Participant
@marksmith3
I agree, I haven't stabbed myself on my four way yet either, but as you said I too like the clearance it provides. That's what attracted me to it.

Mark
27 May 2022 at 11:20 #599516
Hopper
Participant
@hopper
Posted by ega on 27/05/2022 11:09:40:

Assuming that the thread is indeed open:

The feature of the Lammas toolpost that appeals to me is the ability to get the tool tip close to the back centre.

That's an advantage I had not thought of. No more revolving centre body blocking the toolpost just as you get to the last cut! Very nice.
27 May 2022 at 11:21 #599517
SillyOldDuffer
Moderator
@sillyoldduffer
Posted by Michael Gilligan on 27/05/2022 09:20:06:

Dare I ask … Has Dave deleted the wrong thread ?

MichaelG.

Due to my accident prone history I'm the Usual Suspect! Not guilty this time though!

I marked two of three duplicate threads ready to delete them but was distracted, When i got back they were gone.

Deleting duplicate threads is a bit risky. There's always a chance another moderator will zap different altenatives, thus losing everything!

Who said one bad general is better than two good ones?

Dave
27 May 2022 at 11:26 #599519
Mark Smith 3
Participant
@marksmith3
Thank you for looking into it. I managed to re-tell the gist of it and people are responding.

Mark
Author

Posts