Mini lathe chip pan

Mini lathe chip pan

This topic has 1 reply, 1 voice, and was last updated 14 July 2020 at 22:51 by David Caunt.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
14 July 2020 at 22:51 #485680
David Caunt
Participant
@davidcaunt67674
Quickly made from a bit of odd aluminium. Fixed to the travelling steady holes with M6 screws and a washer glued under the head. The holes in the tray have slots up to them hence the tray can be removed and replaced quickly. The screws tightened with fingers. As it is the length allows cuts right up to the chuck and the width keeps the lead screw from the great majority of the turnings. If I make another it will have a higher front side and the end that goes under the chuck would be made just to miss the chuck. I'd also make larger headed screws.

Edited By David Caunt on 14/07/2020 22:51:38
Advert

14 July 2020 at 22:51 #30749
David Caunt
Participant
@davidcaunt67674
An easily removable chip catcher.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Supply company catalogues
  Started by: nevillet in: Workshop Tools and Tooling
- 1
- 1
- 5 April 2025 at 21:02
  nevillet
- Measuring increments on boring head
  Started by: Bill Phinn in: Workshop Techniques
- 15
- 20
- 5 April 2025 at 20:50
  JasonB
- Elliott Omnimill Quill Clamp
  Started by: dangermouse in: Manual machine tools
- 4
- 5
- 5 April 2025 at 20:27
  Paul Kemp
- Problem getting the right parameters on a VFD
  Started by: Robert Graham in: Electronics in the Workshop
- 6
- 7
- 5 April 2025 at 19:45
  peak4
- Chester DB10LB Lathe – Not starting
  Started by: David Deaville in: General Questions
- 1
- 1
- 5 April 2025 at 19:29
  David Deaville
- Flattening brass plates
  Started by: t1krt in: Workshop Techniques
- 4
- 5
- 5 April 2025 at 19:27
  t1krt
- How to wire up 3 phase motor and 3 phase converter?
  Started by: ell81 in: Beginners questions
- 7
- 15
- 5 April 2025 at 18:36
  Robert Atkinson 2
- Morse Key
  Started by: Steve Withnell in: Work In Progress and completed items
- 3
- 3
- 5 April 2025 at 18:20
  Mike Hurley
- Stripped aluminum threads. Now what? 1 2
  Started by: brucemc777 in: Beginners questions
- 19
- 34
- 5 April 2025 at 17:51
  brucemc777
- My week this week! My workshop videos 1 2 … 11 12
  Started by: Phil Whitley in: The Tea Room
- 14
- 286
- 5 April 2025 at 16:00
  Phil Whitley
- Myford S7 Taistock Adjustment
  Started by: Harry Wilkes in: General Questions
- 9
- 12
- 5 April 2025 at 15:17
  Harry Wilkes
- James Coombes Drawing Error (or mine?)
  Started by: Steve Withnell in: Drawing Errors and Corrections
- 4
- 5
- 5 April 2025 at 10:51
  Steve Withnell
- Flexispeed Meteor 2
  Started by: ferroequinologist in: Manual machine tools
- 11
- 19
- 5 April 2025 at 07:01
  ferroequinologist
- What Did You Do Today 2025 1 2 3 4
  Started by: JasonB in: The Tea Room
- 23
- 78
- 4 April 2025 at 20:57
  Nigel Graham 2
- Powered hacksaw – blade lift for the return stroke
  Started by: Sonic Escape in: General Questions
- 8
- 17
- 4 April 2025 at 20:00
  Nicholas Farr
- Damp proofing concrete floors
  Started by: Duff Machinist in: General Questions
- 13
- 13
- 4 April 2025 at 19:57
  Bazyle
- New member old lathe
  Started by: t1krt in: Introduce Yourself – New members start here!
- 8
- 16
- 4 April 2025 at 19:52
  t1krt
- Tangential tooling 1 2
  Started by: Keith Matheson in: Workshop Tools and Tooling
- 13
- 29
- 4 April 2025 at 18:14
  Howard Lewis
- Which lathes have drawbars in the headstock? 1 2
  Started by: ell81 in: Beginners questions
- 17
- 26
- 4 April 2025 at 18:04
  Howard Lewis
- gear cutting with the shaper
  Started by: jacques maurel in: Workshop Techniques
- 5
- 6
- 4 April 2025 at 15:15
  Andrew Tinsley
- Machinery Handbook 1 2
  Started by: Dalboy in: Books
- 30
- 37
- 4 April 2025 at 12:27
  SillyOldDuffer
- Electric motor vibrations
  Started by: Sonic Escape in: General Questions
- 8
- 12
- 4 April 2025 at 07:38
  JasonB
- Build Your Own Metal Working Shop From Scrap (7 book series)
  Started by: Dr_GMJN in: Books
- 6
- 7
- 4 April 2025 at 06:39
  Pete
- Scraping
  Started by: ryan.carter848 in: Books
- 7
- 10
- 4 April 2025 at 05:11
  Pete
- Ml10
  Started by: keel in: Beginners questions
- 5
- 7
- 3 April 2025 at 23:06
  duncan webster 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

April 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies