Cutting BA threads on Myford Super7

Cutting BA threads on Myford Super7

This topic has 1 reply, 1 voice, and was last updated 27 July 2012 at 09:37 by David Allen 8.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
27 July 2012 at 09:37 #95191
David Allen 8
Participant
@davidallen8
BA Threads can be cut on a Super7 with the following gear ratio's. I've used the 2BA setup and works fine, the rest are untried so should be used with care.

OBA Driver 45t, 1st Stud driven 40t, 1st stud driver 21t, 2nd stud 50t[idle wheel] leadscrew 75t. [Setup-2 refer to Myford handbook]

2BA Driver 30t, 1st Stud driven 63t, 1st stud driver 40t, 2nd stud 55t[idle wheel] leadscrew 75t. [Setup-2 refer to Myford handbook]

4BA Driver 21t, 1st Stud driven 50t, 1st stud driver 46t, 2nd stud driven 40t, 2nd stud driver 30t,leadscrew 70t. [Setup-3 refer to Myford handbook]

6BA Driver 20t, 1st Stud driven 60t, 1st stud driver 35t, 2nd stud 45t[idle wheel] leadscrew 70t. [Setup-2 refer to Myford handbook]
Advert

27 July 2012 at 09:37 #30391
David Allen 8
Participant
@davidallen8
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- A rather old contributor
  Started by: Sam Stones in: The Tea Room
- 3
- 3
- 13 January 2025 at 07:07
  Nicholas Farr
- Unkown micrometer manufacturer 1 2
  Started by: Tomk in: Workshop Tools and Tooling
- 11
- 26
- 13 January 2025 at 06:26
  Michael Gilligan
- Coal 1 2
  Started by: Michael Callaghan in: General Questions
- 21
- 43
- 13 January 2025 at 01:48
  Paul Kemp
- Family tree prog
  Started by: JimmieS in: The Tea Room
- 10
- 14
- 12 January 2025 at 21:51
  SillyOldDuffer
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 8 9
  Started by: Neil Wyatt in: Model Engineer.
- 60
- 217
- 12 January 2025 at 21:22
  Neil Wyatt
- Subscriptions – Going Forward 1 2 … 4 5
  Started by: JasonB in: Subscription issues and Digital magazines
- 34
- 106
- 12 January 2025 at 21:18
  SillyOldDuffer
- Had Another Go 1 2 … 5 6
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 19
- 132
- 12 January 2025 at 19:50
  Nick Wheeler
- Powder coating
  Started by: John MC in: The Tea Room
- 7
- 8
- 12 January 2025 at 19:32
  Bazyle
- Lurker looking to help somone
  Started by: peterhod in: Introduce Yourself – New members start here!
- 6
- 7
- 12 January 2025 at 19:21
  peterhod
- Making a flat spring
  Started by: David K in: General Questions
- 7
- 10
- 12 January 2025 at 18:55
  Diogenes
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 6
- 18
- 12 January 2025 at 16:31
  old mart
- Editing an STL file
  Started by: Paul L in: CAD – Technical drawing & design
- 8
- 16
- 12 January 2025 at 14:59
  Paul L
- Flashing Multiple LEDs at the Same Time
  Started by: James Alford in: Electronics in the Workshop
- 5
- 6
- 12 January 2025 at 12:57
  peter1972
- small boring head
  Started by: celso ari schlichting in: General Questions
- 4
- 4
- 12 January 2025 at 12:36
  Tony Pratt 1
- Motorcycle battery charging? Lithium.. 1 2
  Started by: Ian Parkin in: Related Hobbies including Vehicle Restoration
- 17
- 46
- 12 January 2025 at 11:40
  Michael Gilligan
- Weiss 290 Lathe Power Issue
  Started by: thisdesignedthat in: Manual machine tools
- 3
- 4
- 12 January 2025 at 07:57
  thisdesignedthat
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 7
- 14
- 11 January 2025 at 20:18
  JasonB
- What Did You Do Today 2025
  Started by: JasonB in: The Tea Room
- 12
- 19
- 11 January 2025 at 18:37
  Diogenes
- Mill Power feed unit. 1 2 3
  Started by: Taf_Pembs in: Manual machine tools
- 21
- 57
- 11 January 2025 at 18:32
  Diogenes
- Watch Cine Photography Microscopy in slowmo
  Started by: Ian P in: The Tea Room
- 2
- 2
- 11 January 2025 at 16:16
  Michael Gilligan
- Internal thread & taper in same hole
  Started by: Dell in: Workshop Techniques
- 9
- 21
- 11 January 2025 at 14:55
  Dell
- building milling machine made from scrap part 1
  Started by: celso ari schlichting in: General Questions
- 1
- 2
- 11 January 2025 at 14:49
  celso ari schlichting
- Bars for Boring Head 1 2
  Started by: adamcowman in: Workshop Tools and Tooling
- 13
- 27
- 11 January 2025 at 11:53
  duncan webster 1
- Sieg KX3 USB
  Started by: Matt Harrington in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 6
- 11 January 2025 at 11:00
  Ian Johnson 1
- Spring material advice needed
  Started by: old mart in: Materials
- 13
- 23
- 10 January 2025 at 22:08
  Bill Phinn

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies