Model Engine Castings Ident Boo Boo!

Advert

New Replies

Report Bug

Help/FAQs

Model Engine Castings Ident Boo Boo!

This topic has 19 replies, 7 voices, and was last updated 24 January 2022 at 18:27 by Martin King 2.

Viewing 20 posts - 1 through 20 (of 20 total)

Author

Posts
20 January 2022 at 18:07 #581415
Martin King 2
Participant
@martinking2
Hi All,

I do not wish to mislead anyone with my latest listing which is SUPPOSEDLY for a set of STUART Beam Engine castings minus the flywheel as in the auction description where I bought them in with other stuff.

Pretty sure they ARE NOT Stuart so would love some help identifying them please.

I have pulled the listing until clarified.

Regards, Martin
Advert

20 January 2022 at 18:07 #30197
Martin King 2
Participant
@martinking2
20 January 2022 at 18:12 #581417
JasonB
Moderator
@jasonb
Looks like a Sanderson beam to me. Blackgates do them and would probably supply just the flywheel to a buyer

Edited By JasonB on 20/01/2022 18:13:05
20 January 2022 at 18:28 #581421
Phil P
Participant
@philp
Yes they are Sanderson castings, I have a set just the same.

Phil
20 January 2022 at 18:41 #581423
Former Member
Participant
@formermember12892
[This posting has been removed]
20 January 2022 at 19:01 #581428
Martin King 2
Participant
@martinking2
Thanks very much guys for the help.

will go through the items carefully tomorrow to see EXACTLY what I have before listing them again.

I will also have a chat with the auction house about their description which was why I was bidding in the first place.

however it does go to show that a little knowledge (on my part) can be dangerous! 😗

cheers, Martin
21 January 2022 at 14:39 #581553
Mark Rand
Participant
@markrand96270
I think that the Sanderson is a much nicer engine than the Stuart. But I probably shouldn't say that if you are selling the castings.
21 January 2022 at 15:51 #581565
Martin King 2
Participant
@martinking2
The auction house has agreed the mis description, just waiting to see how we resolve it.

Cheers, Martin
23 January 2022 at 17:38 #581951
Martin King 2
Participant
@martinking2
Hi All,

i have sorted out the mis-description with the Auction House who were very helpful.

I have got a photo of what SHOULD be a FULL set of Sanderson castings and have marked the ones I do and do not have. There do however appear to be two cylinder casting and two of the support arm castings in the photo of which I only have one each? The Blackgates pic shows only one of each I think?

Y for what I have and X for what is missing.

I also appear to have 6 "extra" bronze or GM castings as shown here?

Any help most welcome to get to the bottom of this so I can list them with confidence and accuracy.

Cheers, Martin
23 January 2022 at 18:00 #581956
JasonB
Moderator
@jasonb
The second cylinder and the two brackets are not needed for the engine but may be a selling point particularly the cylinder which could be warded as a spare should something go/be wrong with the other.

The other bronze bits are probably best sold as a job lot of "assorted model steam engine castings" or similar
23 January 2022 at 18:36 #581959
John Purdy
Participant
@johnpurdy78347
Of your extra bronze castings I think the smaller of the circular ones with the chucking piece may be the piston casting. I seem to recall when I made mine that the piston was a similar casting. The finished piston is 1" dia. by 7/16" thick if that fits with its dimensions ( allowing for a machining allowance ).

John
23 January 2022 at 18:42 #581961
JasonB
Moderator
@jasonb
I think the piston casting is in the group shot between the cylinder and the stick of bronze.
23 January 2022 at 18:53 #581963
John Purdy
Participant
@johnpurdy78347
Jason, I'm not quite sure what you mean is the piston castings?
23 January 2022 at 19:03 #581966
JasonB
Moderator
@jasonb
Actually I think you may be right John, what I thought Martin was allowing the piston to be may well be the eccentric
23 January 2022 at 19:30 #581973
Martin King 2
Participant
@martinking2
Jason, I do not have the second cylinder and second support bracket so I am OK with just the one of each.

Again, are there supposed to be two of the small castings to the right of the beam? I only have the one.

I will list the extra castings along with the main lot.

cheers, Martin
23 January 2022 at 19:50 #581981
John Purdy
Participant
@johnpurdy78347
Jason, yes I believe that is the eccentric, the chucking piece is offset.

Martin, the larger of the two round cast bronze sticks is material for the main and beam bearing bronzes. That is what was supplied for them with my castings which came from Clarksons in '82.

The two castings to the right of the beam you mention are the support for the parallel motion anchor links, and no, only one is required. It is fastened to the top of the support bracket between the cylinder and the column.

John
24 January 2022 at 08:02 #582044
Martin King 2
Participant
@martinking2
Many thanks guys for clarifying all this.

As you know eBay is our small business and there is nothing worse than mis-describing items listed.

We try hard to be accurate in our listings and this has been a great help.

Cheers, Martin
24 January 2022 at 09:48 #582056
Circlip
Participant
@circlip
To advertisers on the magic flee, ALL tooling is "Suitable for Mifford" and ALL steam engines and castings are "Stuart Turner" but pot luck if blind bidding at an auction.

Regards Ian.
24 January 2022 at 09:56 #582058
Former Member
Participant
@formermember12892
[This posting has been removed]
24 January 2022 at 18:27 #582163
Martin King 2
Participant
@martinking2
!

Martin
Author

Posts