what material

what material

This topic has 4 replies, 3 voices, and was last updated 27 November 2019 at 20:34 by Kevin Bennett.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
27 November 2019 at 19:18 #439084
Kevin Bennett
Participant
@kevinbennett25223
Hi Every one, What material do I need for the 2 stays on a 5" Tich copper boiler.

Thanks Kevin
Advert

27 November 2019 at 19:18 #29973
Kevin Bennett
Participant
@kevinbennett25223
27 November 2019 at 20:15 #439095
Tim Stevens
Participant
@timstevens64731
As this is a safety-related component, I suggest that you refer to your drawing. If you have no drawing and you don't know the answer from experience, should you really be making parts which can blow up in someone's face?

Tim
27 November 2019 at 20:30 #439103
Brian H
Participant
@brianh50089
Hello Kevin, you are in a club then ask the boiler inspector or see if someone has the drawing with the information on it. As there are only 2 stays I'm assuming that these are longitudinal stays. Are they threaded or silver soldered in? Material is most likely to be phosphor bronze but may also be copper but check before you do anything.

Brian

Edited By Brian H on 27/11/2019 20:36:49
27 November 2019 at 20:34 #439106
Kevin Bennett
Participant
@kevinbennett25223
Hi Tim all I have is the drawings and no material list to refer to on the drawing all it says is 2 holes 3/16 stays and that is it . I will have to see if GKR Kennions have a list as I did get the drawings from them .

Thanks for the reply Kevin
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- New member – garage tinkerer
  Started by: spencerd72 in: Introduce Yourself – New members start here!
- 4
- 4
- 25 February 2025 at 04:56
  Howard Lewis
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 3
- 3
- 25 February 2025 at 02:51
  Chris Crew
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 6
- 7
- 25 February 2025 at 01:23
  peak4
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 36
- 25 February 2025 at 00:55
  bernard towers
- How Would I Machine this CAD designed Ratchet 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 14
- 28
- 25 February 2025 at 00:25
  peter1972
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 9
- 18
- 24 February 2025 at 22:49
  rjenkinsgb
- Source for trangular carbide inserts.
  Started by: Andrew Tinsley in: General Questions
- 8
- 12
- 24 February 2025 at 22:39
  Vic
- Which “silent” air compressor shall I get? 1 2
  Started by: beeza650 in: Workshop Tools and Tooling
- 20
- 27
- 24 February 2025 at 21:47
  Nick Wheeler
- What’s this for…no.4?
  Started by: beeza650 in: Beginners questions
- 5
- 6
- 24 February 2025 at 21:32
  noel shelley
- What’s this for…no.3?
  Started by: beeza650 in: Beginners questions
- 6
- 6
- 24 February 2025 at 21:29
  noel shelley
- Ml7 cross slide gib strip
  Started by: Compulsive purchaser in: Manual machine tools
- 2
- 2
- 24 February 2025 at 21:14
  Pete Rimmer
- Stirlingmotor ‘Rainer
  Started by: werz99 in: Work In Progress and completed items
- 1
- 1
- 24 February 2025 at 20:53
  werz99
- Motor Boys
  Started by: bernard towers in: General Questions
- 6
- 9
- 24 February 2025 at 20:50
  Roderick Jenkins
- Martin Evans Metro
  Started by: Philip Wheatcroft in: Locomotives
- 2
- 3
- 24 February 2025 at 20:14
  Philip Wheatcroft
- What’s this for…no.2?
  Started by: beeza650 in: Beginners questions
- 7
- 10
- 24 February 2025 at 19:46
  Tony Pratt 1
- Minnie Traction Engine – Driving Pin Position
  Started by: Richard B in: Help and Assistance! (Offered or Wanted)
- 4
- 6
- 24 February 2025 at 19:26
  Andy Stopford
- What’s this for?
  Started by: beeza650 in: Beginners questions
- 16
- 21
- 24 February 2025 at 19:23
  Andrew Crow
- Another Fobco Chuck
  Started by: spencerd72 in: Workshop Tools and Tooling
- 4
- 7
- 24 February 2025 at 18:23
  spencerd72
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 68
- 276
- 24 February 2025 at 17:09
  Neil Wyatt
- 3/16” BSF mill gib screws
  Started by: Graham Horne 2 in: General Questions
- 13
- 25
- 24 February 2025 at 15:32
  not done it yet
- WM14 mill/drill gears
  Started by: michael howarth 1 in: General Questions
- 2
- 4
- 24 February 2025 at 13:21
  JasonB
- Arceurotrade New Sieg SC4 Lathe.
  Started by: Lathejack in: Manual machine tools
- 10
- 13
- 24 February 2025 at 13:09
  JasonB
- Looking for an OCR package with ‘snap’ facilities
  Started by: Greensands in: The Tea Room
- 1
- 1
- 24 February 2025 at 13:04
  Greensands
- Recommended books for starting model engineering
  Started by: Andrew Schofield in: Beginners questions
- 8
- 9
- 24 February 2025 at 13:04
  noel shelley
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 12
- 16
- 24 February 2025 at 11:42
  Dave Halford

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies