Small head metric hexagon bolts and nuts

Small head metric hexagon bolts and nuts

This topic has 4 replies, 3 voices, and was last updated 24 April 2019 at 18:26 by JasonB.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
24 April 2019 at 16:54 #406288
Mark P.
Participant
@markp
Hello all, is there anywhere that sells smaller than standard head metric bolts and nuts in m5 m4 & m3 etc . I know that I can get one size smaller ba ones but I should like scale sized metric ones.

Regards Mark P.
Advert

24 April 2019 at 16:54 #29913
Mark P.
Participant
@markp
24 April 2019 at 18:15 #406303
Brian Baker 2
Participant
@brianbaker2
Greetings Mark,

I know Polly Models supplies them, I have used them & they are fine.

I have also heard of a possible supplier from Germany, but have no details.

Regards

Brian
24 April 2019 at 18:25 #406306
Mark P.
Participant
@markp
Thanks Brian, I did have a look at their website but couldn't see any.

I have heard about the German company but like you I can't remember the name.

I've tried ebay and EKP but no joy, EKP will make them but need to buy 1000+.

Regards Mark P.
24 April 2019 at 18:26 #406309
JasonB
Moderator
@jasonb
I too use the ones from Polly though mostly I buy direct from their supplier GHW in Germany. They are all machines and not stamped out though I think M4 is the largest they do having a 5.5mm hex. I do find the M4 a little bit tall so tend to skim 0.5mm off the bottom, the smaller sizes are OK.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Harrison Universal Milling Machine Feed Gears & 3Phase
  Started by: Steve Taylor 2 in: Workshop Tools and Tooling
- 15
- 25
- 25 February 2025 at 11:47
  MARK RIGG
- Harrison Milling Machines
  Started by: MARK RIGG in: Manual machine tools
- 2
- 2
- 25 February 2025 at 11:34
  DC31k
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 10
- 19
- 25 February 2025 at 11:21
  Geraint Williams
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 68
- 277
- 25 February 2025 at 11:19
  duncan webster 1
- Centec 2b mill rebuild
  Started by: Graham Horne 2 in: Manual machine tools
- 3
- 8
- 25 February 2025 at 10:46
  Graham Horne 2
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 9
- 25 February 2025 at 10:43
  John Haine
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 10
- 11
- 25 February 2025 at 10:40
  John Haine
- Which “silent” air compressor shall I get? 1 2
  Started by: beeza650 in: Workshop Tools and Tooling
- 20
- 28
- 25 February 2025 at 09:36
  noel shelley
- What’s this for?
  Started by: beeza650 in: Beginners questions
- 18
- 24
- 25 February 2025 at 09:09
  Clive Foster
- How Would I Machine this CAD designed Ratchet 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 14
- 31
- 25 February 2025 at 09:02
  SillyOldDuffer
- New member – garage tinkerer
  Started by: spencerd72 in: Introduce Yourself – New members start here!
- 4
- 4
- 25 February 2025 at 04:56
  Howard Lewis
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 36
- 25 February 2025 at 00:55
  bernard towers
- Source for trangular carbide inserts.
  Started by: Andrew Tinsley in: General Questions
- 8
- 12
- 24 February 2025 at 22:39
  Vic
- What’s this for…no.4?
  Started by: beeza650 in: Beginners questions
- 5
- 6
- 24 February 2025 at 21:32
  noel shelley
- What’s this for…no.3?
  Started by: beeza650 in: Beginners questions
- 6
- 6
- 24 February 2025 at 21:29
  noel shelley
- Ml7 cross slide gib strip
  Started by: Compulsive purchaser in: Manual machine tools
- 2
- 2
- 24 February 2025 at 21:14
  Pete Rimmer
- Stirlingmotor ‘Rainer
  Started by: werz99 in: Work In Progress and completed items
- 1
- 1
- 24 February 2025 at 20:53
  werz99
- Motor Boys
  Started by: bernard towers in: General Questions
- 6
- 9
- 24 February 2025 at 20:50
  Roderick Jenkins
- Martin Evans Metro
  Started by: Philip Wheatcroft in: Locomotives
- 2
- 3
- 24 February 2025 at 20:14
  Philip Wheatcroft
- What’s this for…no.2?
  Started by: beeza650 in: Beginners questions
- 7
- 10
- 24 February 2025 at 19:46
  Tony Pratt 1
- Minnie Traction Engine – Driving Pin Position
  Started by: Richard B in: Help and Assistance! (Offered or Wanted)
- 4
- 6
- 24 February 2025 at 19:26
  Andy Stopford
- Another Fobco Chuck
  Started by: spencerd72 in: Workshop Tools and Tooling
- 4
- 7
- 24 February 2025 at 18:23
  spencerd72
- 3/16” BSF mill gib screws
  Started by: Graham Horne 2 in: General Questions
- 13
- 25
- 24 February 2025 at 15:32
  not done it yet
- WM14 mill/drill gears
  Started by: michael howarth 1 in: General Questions
- 2
- 4
- 24 February 2025 at 13:21
  JasonB
- Arceurotrade New Sieg SC4 Lathe.
  Started by: Lathejack in: Manual machine tools
- 10
- 13
- 24 February 2025 at 13:09
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies