Steel brick

Steel brick

This topic has 5 replies, 4 voices, and was last updated 18 December 2015 at 20:36 by Neil Wyatt.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
18 December 2015 at 18:41 #216883
Geoff Lewis 2
Participant
@geofflewis2
i am looking for a lump of mild steel measuring 8 3/8" x 10 1/8" x 2 7/8"
reasonable price considered. offcut ok

i have for disposal a fine piece of round section steel. not sure of it's composition but it submits to filing ok.
a photograph is attached.

the outer diameter is 10 3/4" and the stepped down diameter is 9 1/2". overall height of piece when laid flat on't floor is just over 3 5/16". depth of reduced diameter is approx 15/16"

I really want to swap or come to some sort of arrangement if purchase is necessary and could possibly meet up for exchange or whatever

Edited By JasonB on 18/12/2015 19:58:58
Advert

18 December 2015 at 18:41 #29560
Geoff Lewis 2
Participant
@geofflewis2
Lump of MS required for carving with milling machine
18 December 2015 at 18:53 #216888
Martin Connelly
Participant
@martinconnelly55370
Location always helps with a request like this.

Martin
18 December 2015 at 19:19 #216895
Geoff Lewis 2
Participant
@geofflewis2
Sorry, I should have mentioned I live in Cardiff area. I have also tried to upload about 6 photos but it keeps dropping four of them out. I haven't quite got the hang of this thing yet and the print in this box is so small I can hardly see it?

Many thanks. How do I edit the posting?
18 December 2015 at 19:38 #216901
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Geoff Lewis 2 on 18/12/2015 19:19:07:

How do I edit the posting?

.

Geoff,

Members only get a short period in which we can edit our posts [after which, the option disappears from the menu].

If there is an important change that you need to be made, you can ask a Moderator to do it.

MichaelG.
18 December 2015 at 20:36 #216918
Neil Wyatt
Moderator
@neilwyatt
Posted by Geoff Lewis 2 on 18/12/2015 19:19:07:

Sorry, I should have mentioned I live in Cardiff area. I have also tried to upload about 6 photos but it keeps dropping four of them out. I haven't quite got the hang of this thing yet and the print in this box is so small I can hardly see it?

That means your image is huge or the overall upload size is to large. Try uploading one at a time, they will be cropped to 1024 pixels in the largest dimension anyway (keeps page load speeds sensible for people viewing on slow connections).

Neil
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Electric Car Battery Retention
  Started by: Vic in: The Tea Room
- 9
- 10
- 7 February 2025 at 20:15
  vintagengineer
- Cheap but useful Multimeter
  Started by: Danni Burns in: Electronics in the Workshop
- 3
- 3
- 7 February 2025 at 20:15
  peak4
- CA glue and magnetism
  Started by: Bill Phinn in: General Questions
- 8
- 8
- 7 February 2025 at 19:52
  Michael Gilligan
- [Mercedes] Becker Map Pilot
  Started by: Michael Gilligan in: The Tea Room
- 1
- 1
- 7 February 2025 at 19:02
  Michael Gilligan
- Drilling feed rates
  Started by: Beardy Mike in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 2
- 7 February 2025 at 18:53
  JasonB
- How to identify a thread, ACME vs TR
  Started by: moonman in: Beginners questions
- 14
- 20
- 7 February 2025 at 18:37
  Robert Atkinson 2
- Calling all Little John and other Raglan users
  Started by: David Senior in: General Questions
- 2
- 3
- 7 February 2025 at 18:02
  David Senior
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 11
- 18
- 7 February 2025 at 16:52
  Macolm
- 3D Touch Probe, Sieg KX3 & Mach3
  Started by: Matt Harrington in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 7 February 2025 at 16:29
  Matt Harrington
- Parting off – Left over nib
  Started by: Blue Heeler in: Workshop Techniques
- 7
- 11
- 7 February 2025 at 15:57
  Colin Heseltine
- Alibre Workshop/Meshcam pro
  Started by: Ian McVickers in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 9
- 7 February 2025 at 11:48
  Ian McVickers
- speed control dc motor problem.
  Started by: mark smith 20 in: Workshop Tools and Tooling
- 2
- 4
- 7 February 2025 at 10:57
  mark smith 20
- What Do These Mean; Why So Many Loop Errors? (Alibre Atom)
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 5
- 11
- 7 February 2025 at 10:20
  Nealeb
- Eastern European Steam
  Started by: parovoz in: Introduce Yourself – New members start here!
- 11
- 16
- 7 February 2025 at 08:27
  james rumble
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 6
- 10
- 7 February 2025 at 07:05
  Diogenes
- OKMO Microcosm Model M31 Vertical Steam Engine Single Cylinder with DIY Mods
  Started by: Blue Heeler in: Stationary engines
- 1
- 1
- 7 February 2025 at 01:07
  Blue Heeler
- Solid Edge – Spring Designer – Help! 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 7
- 28
- 6 February 2025 at 17:51
  SillyOldDuffer
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 3
- 4
- 6 February 2025 at 17:06
  zymurgy2289
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 13
- 16
- 6 February 2025 at 16:57
  Andrew Tinsley
- Lidl spray aerosol items 1 2
  Started by: Bootlegger Blacky in: Hints And Tips for model engineers
- 20
- 26
- 6 February 2025 at 16:53
  Mick B1
- Totally unacceptable treatment 1 2
  Started by: Me. in: General Questions
- 14
- 28
- 6 February 2025 at 15:49
  John Hinkley
- Changes to Well-Known Auction Site 1 2
  Started by: Chris Crew in: The Tea Room
- 21
- 28
- 6 February 2025 at 13:48
  Tony Pratt 1
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 9
- 25
- 6 February 2025 at 13:14
  JasonB
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 79
- 6 February 2025 at 11:36
  SillyOldDuffer
- The most difficult project?
  Started by: Tony Martyr in: Stationary engines
- 5
- 15
- 6 February 2025 at 11:25
  Chris Gunn

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies