The world of model and hobby engineering

Subscribe

The Modelling Hub Logo

The world of model and hobby engineering

Subscribe
Buy Latest Issue

Forums

Help

Register

Log in

Brass Hardening

Advert
New Replies
Report Bug
Help/FAQs

Brass Hardening

Home › Forums › Materials › Brass Hardening

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 10 August 2012 at 00:59 #96071
    Chris Trice
    Participant
      @christrice43267

      When I silver solder brass tube together, it's obvious that it's been annealed (softened) by the ease with which the tube can be bent but did I read somewhere that the brass will slowly harden again over time or is there a process I don't know about for hardening brass?

      Edited By Chris Trice on 10/08/2012 00:59:42

      Advert
      10 August 2012 at 00:59 #29464
      Chris Trice
      Participant
        @christrice43267
        10 August 2012 at 01:13 #96073
        John Stevenson 1
        Participant
          @johnstevenson1

          Years ago brass was hardened by heating up to cherry red and quenching into the blood of a 16 year old virgin.

          Given the current state of play, chances are it will be a long time before we see and hard brass again.

           

          John S.

          Edited By John Stevenson on 10/08/2012 01:14:04

          10 August 2012 at 08:56 #96080
          MICHAEL WILLIAMS
          Participant
            @michaelwilliams41215

            Hi Chris ,

            Ordinary engineering grades of brass will age harden in a few weeks to a few months . Time depends on cross section .

            High zinc content brasses and ones with added lead don't age harden .

            Some poor quality 'yellow' brasses can crystalise over time and crumble away .

            There is no way of hardening brass by heat treatment . Cold working (ie forging) will harden brass but this is usually impractical on machined parts .

            Sheet brass for ornamental work is often planished both to improve the surface appearance and to harden the metal .

            Regards ,

            Michael Williams .

            10 August 2012 at 12:51 #96086
            macmarch
            Participant
              @macmarch

              All brass will develop stress when worked.

              Always leave a small radius at the bottom when turning down.

              Bend sheet slowly to allow the stresses to flow. Then heat to dull red and quench in water or leave to cool. This will prevent season cracking and early failure. Look at "season cracking" on wikipedia etc.

              ray

              10 August 2012 at 19:00 #96111
              Sub Mandrel
              Participant
                @submandrel

                When punching a lot of small holes in some brass sheet, I found it hardened noticeably overnight when i annealed it but didn't try and work it until the next day.

                neil

                11 August 2012 at 12:23 #96151
                Chris Trice
                Participant
                  @christrice43267

                  Thanks for all the replies. I've had a similiar experiences when just after annealing, the brass is clearly very soft and easy to manipulate but it seems much harder the next day. I'm glad I wasn't imagining it.

                • Author
                  Posts
                Viewing 7 posts - 1 through 7 (of 7 total)
                • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                Latest Replies
                Report Bug
                Code of Conduct
                Help & FAQs
                Advert

                Latest Replies

                Home › Forums › Materials › Topics

                Viewing 25 topics - 1 through 25 (of 25 total)
                Viewing 25 topics - 1 through 25 (of 25 total)

                View full reply list.

                Advert

                Latest Issues

                Subscribe
                Buy Latest/Back Issues

                Newsletter Sign-up

                Latest Replies