I need to change the speed change belt on an ML10 and while I am at it, I may as well change the countershaft pulley too. These items are 66 and 166 on the Myford drawings, that come with the handbook.

The 166 countershaft pully is an A25 code V, U or W. The A25 bit is easy enough, being a 25" A section belt, what code V, U or W means, is baffling. The Z810 belt (item 66) which is in sore need of changing doesn't respond to my googling. Can anyone tell me what or where I should be looking?

Thanks,

Andrew.

Hello Nick,

Yes I did try Myford. At £12.50 each, or £25 for the two belts, I decided that it was just a little too expensive! I can get the A25 belt from a reputable supplier for as little as £2.10, plus VAT.

Regards,

Andrew.

Edited By Andrew Tinsley on 31/07/2023 21:54:32

Hello all,

Thanks for the help and advice! What stymied me was I could find no reference to Z belts. If an M series belt is only 0.5 mm difference to a Z belt then problem solves.

I am now sorted for considerably less than half of £25, no doubt plus postage!

Thanks again,

Andrew.