Water Gauge three cock

Water Gauge three cock

This topic has 2 replies, 2 voices, and was last updated 25 March 2010 at 13:37 by JasonB.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
25 March 2010 at 09:10 #50137
Bob Dennis
Participant
@bobdennis15142
Hi I am building a 2″ Fowler Showmans, I have tried to buy a three cock water gauge but they are all to big. I have decided to build my own can any one point me in the right direction for drawings or indeed have some that they could share with me. Also whats the thoughts on a parallel cock with “o” rings as apposed to the standard tapered cock.

Regards Bob
Advert

25 March 2010 at 09:10 #2685
Bob Dennis
Participant
@bobdennis15142
25 March 2010 at 13:37 #50147
JasonB
Moderator
@jasonb
Have you Tried MJ Engineering alan does them so should fit a 2″ engine.

http://www.mjeng.co.uk/mjfittings.html

RA Baker also do a 7mm glass one which should be small enough.

http://www.rabarker.co.uk/page7.html

Jason
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Forum Post downloads to user
  Started by: Speedy Builder5 in: Website Questions, Comments, and Suggestions
- 3
- 4
- 23 December 2024 at 10:40
  SillyOldDuffer
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 3 4
  Started by: Neil Wyatt in: Model Engineer.
- 45
- 93
- 23 December 2024 at 10:30
  Michael Gilligan
- Stuart Steam Boiler Feed Pump – Cylinder Scrapped
  Started by: David Deaville in: General Questions
- 6
- 7
- 23 December 2024 at 10:26
  noel shelley
- New member from belgium
  Started by: davp1971 in: Introduce Yourself – New members start here!
- 2
- 2
- 23 December 2024 at 10:19
  noel shelley
- Warco WM290V and ELS
  Started by: Steven Shand in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 7
- 10
- 23 December 2024 at 10:02
  tony1949
- Drilling holes in boiler banding.
  Started by: Michael Callaghan in: Hints And Tips for model engineers
- 8
- 13
- 23 December 2024 at 09:21
  JasonB
- Help for DIY lathe build.
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 10
- 11
- 23 December 2024 at 09:21
  Michael Gilligan
- Warco 720 1 2
  Started by: Mick Bailey in: Manual machine tools
- 12
- 28
- 23 December 2024 at 08:03
  Diogenes
- How would you do this?
  Started by: moonman in: Beginners questions
- 5
- 5
- 23 December 2024 at 07:29
  Diogenes
- How to sort this problem out.
  Started by: Michael Callaghan in: Workshop Techniques
- 9
- 11
- 22 December 2024 at 23:11
  Mick Bailey
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 7
- 8
- 22 December 2024 at 22:16
  Charles Lamont
- ELS for BOXFORD AUD 1 2 3
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 17
- 57
- 22 December 2024 at 19:40
  Robert Atkinson 2
- Recommissioning a small vertical boiler
  Started by: Mark Salzedo 1 in: General Questions
- 7
- 18
- 22 December 2024 at 19:24
  Mark Salzedo 1
- Replacement Motor Wiring
  Started by: Gary Lynch in: General Questions
- 3
- 3
- 22 December 2024 at 19:06
  noel shelley
- Dial gauge troubles
  Started by: Roger Hart in: Workshop Tools and Tooling
- 9
- 13
- 22 December 2024 at 14:35
  Mick B1
- L5 issue
  Started by: Neil Taylor in: Beginners questions
- 6
- 11
- 22 December 2024 at 10:43
  Emgee
- Model Engineering Survey – What Do YOU make? 1 2 3 4
  Started by: SillyOldDuffer in: General Questions
- 52
- 80
- 21 December 2024 at 23:01
  SillyOldDuffer
- Microscope marking objective
  Started by: old mart in: Clocks and Scientific Instruments
- 6
- 16
- 21 December 2024 at 20:48
  old mart
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 1
- 1
- 21 December 2024 at 20:18
  old mart
- Some VERY interesting LED modules 1 2 … 5 6
  Started by: Michael Gilligan in: Electronics in the Workshop
- 18
- 131
- 21 December 2024 at 19:23
  SillyOldDuffer
- 775 Motor based Dynamo ? 1 2
  Started by: JasonB in: Miscellaneous models
- 6
- 47
- 21 December 2024 at 18:48
  JasonB
- Sable 2015 Desktop CNC / engraver
  Started by: Bazyle in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 17
- 21 December 2024 at 17:54
  John Haine
- GRIPTRU Chuck adjust
  Started by: Speedy Builder5 in: Workshop Techniques
- 12
- 19
- 21 December 2024 at 14:31
  Michael Gilligan
- What did you do Today 2024 1 2 … 20 21
  Started by: JasonB in: The Tea Room
- 75
- 518
- 21 December 2024 at 14:30
  bernard towers
- Miniatur Wunderland
  Started by: Paul Lousick in: Miscellaneous models
- 3
- 3
- 21 December 2024 at 11:30
  noel shelley

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4758

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies