V8 Engine

V8 Engine

This topic has 1 reply, 1 voice, and was last updated 11 May 2010 at 10:24 by Bob Dennis.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
11 May 2010 at 10:24 #51603
Bob Dennis
Participant
@bobdennis15142
Hi I have built a few four stroke engines my last being a Edwards 5 radial. I now want to build a water cooled V8 engine. I have found drawings for two, one is called the Challenger, the other is the Scorpion. The Challenger is a V8 with the one cam shaft between the cylinders, with oil pump and water pump and spark ignition. The Scorpion is a twin overhead cam but glow ignition, and using glow fuel which has oil in it, allowing blow by to lubricate the bottom end and cams.

Has anyone built ether or has experience of them or knows of any other V8’s with drawings that I could consider.

Regards Bob
Advert

11 May 2010 at 10:24 #2271
Bob Dennis
Participant
@bobdennis15142
V8 Engine
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Totally unacceptable treatment
  Started by: me1 in: General Questions
- 5
- 7
- 31 January 2025 at 14:52
  Jon Lawes
- CAD – Target Enigma 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 69
- 31 January 2025 at 14:47
  duncan webster 1
- Had Another Go 1 2 … 14 15
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 22
- 352
- 31 January 2025 at 14:20
  David Jupp
- not so ‘run of the mill’?
  Started by: An Other in: Model Engineer.
- 6
- 14
- 31 January 2025 at 13:47
  Bazyle
- Camel back straight edge 1 2
  Started by: me1 in: General Questions
- 13
- 33
- 31 January 2025 at 13:36
  peak4
- Using Schneider ATV12 with remote terminal VW3A1006.
  Started by: chrismac in: Workshop Tools and Tooling
- 4
- 14
- 31 January 2025 at 13:02
  chrismac
- Drawing Standards 1 2
  Started by: John Stevenson 1 in: CAD – Technical drawing & design
- 25
- 36
- 31 January 2025 at 11:40
  Nick Hughes
- Refurbishing alloy wheels
  Started by: Mike Crossfield in: The Tea Room
- 9
- 15
- 31 January 2025 at 11:38
  Michael Gilligan
- What Did You Do Today 2025 1 2
  Started by: JasonB in: The Tea Room
- 18
- 38
- 31 January 2025 at 10:36
  Roderick Jenkins
- Myford S7 VFD problem 1 2
  Started by: Glyn Davies in: Manual machine tools
- 20
- 30
- 31 January 2025 at 10:35
  Dave Halford
- Shades of black humour
  Started by: JimmieS in: The Tea Room
- 11
- 11
- 31 January 2025 at 10:04
  pgk pgk
- Christmas comes early !!
  Started by: Michael Gilligan in: The Tea Room
- 6
- 7
- 31 January 2025 at 09:00
  Nicholas Farr
- battery charger
  Started by: duncan webster 1 in: Electronics in the Workshop
- 13
- 23
- 30 January 2025 at 23:58
  Vic
- OKMO Microcosm JO6B Miniature Stirling Engine
  Started by: Blue Heeler in: Miscellaneous models
- 1
- 1
- 30 January 2025 at 22:18
  Blue Heeler
- Early Myford Super-7B gear change wheels??
  Started by: flatline in: Beginners questions
- 7
- 16
- 30 January 2025 at 21:11
  flatline
- The wonders of AI…
  Started by: Robin Graham in: The Tea Room
- 6
- 7
- 30 January 2025 at 20:45
  JohnF
- 16-Channel Analog Multiplexer Demultiplexer
  Started by: Michael Gilligan in: Electronics in the Workshop
- 4
- 8
- 30 January 2025 at 20:35
  Bazyle
- Mind-Boggling Numbers
  Started by: Michael Gilligan in: The Tea Room
- 5
- 9
- 30 January 2025 at 16:22
  jaCK Hobson
- For Sale Voltera V1 PCB machine
  Started by: Redpiperbob in: General Questions
- 3
- 3
- 30 January 2025 at 15:26
  JasonB
- Transistor Circuit to Operate Relay from Arduino Uno 1 2
  Started by: James Alford in: Electronics in the Workshop
- 11
- 40
- 30 January 2025 at 13:38
  John Haine
- Fixing boiler cleading to firebox
  Started by: Peter Venn in: General Questions
- 6
- 6
- 30 January 2025 at 12:57
  duncan webster 1
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 108
- 30 January 2025 at 11:43
  Graham Meek
- Wicking felt for lathe headstock bearings
  Started by: YouraT in: Manual machine tools
- 10
- 25
- 30 January 2025 at 02:54
  Michael Gilligan
- building milling machine made from scrap part 1
  Started by: celso ari schlichting in: General Questions
- 1
- 6
- 29 January 2025 at 21:50
  celso ari schlichting
- Press Fit 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 18
- 26
- 29 January 2025 at 20:25
  Peter Simpson 3

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies