O ring suppliers

Advert

New Replies

Report Bug

Help/FAQs

O ring suppliers

This topic has 13 replies, 12 voices, and was last updated 2 July 2012 at 22:39 by Gordon A.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
2 July 2012 at 11:20 #93537
mick
Participant
@mick65121
I've been looking on-line for over half an hour for an "O" ring supplier, I only need one 3/8th. or 9.50mm O/D "O" ring, I'm quite happy to buy the minium quantity of 20 but not too happy about the minium order of £10 + VAT + £3.75 p&p Any body know of a friendly supplier?
Advert

2 July 2012 at 11:20 #22137
mick
Participant
@mick65121
2 July 2012 at 11:31 #93538
Flywheel
Participant
@flywheel
Why not try your local Bearing/oil seal supp;ier they will probably sell you just the one
2 July 2012 at 11:51 #93539
Windy
Participant
@windy30762
ALDI sell boxes boxes of imperial and metric o rings if not in now they eventualy come back in the store.

Polly might be able to help

If desparate PM me with dimensions id od and diameter of cord as long as it's not a special material required (silicon?) will see what I have.

Windy

Edited By Windy on 02/07/2012 11:53:59
2 July 2012 at 12:11 #93540
Roger Woollett
Participant
@rogerwoollett53105
I have used Simply Bearings in the past and found them very reasonable. They list 9,5 i/d, 12.5 o/d nitrile rings as £2.29 + VAT for 2off. Postage is £1.50. They have a big range and a choice of materials.

**LINK**

Roger Woollett
2 July 2012 at 13:20 #93543
Terryd
Participant
@terryd72465
Hi Mick,

Try Macc models, I have bought quite a few 'O' rings of various materials and sizes and he sells singles. It is worth looking through his extensive catalogue to stock up on a few items to make P&P worthwhile as he charges by weight. In fact he is showing a 3/8" od, 1/4" id silcone 'O' ring for 29p at the moment here.

Regards

Terry

Edited By Terryd on 02/07/2012 13:21:12
2 July 2012 at 14:40 #93545
DMB
Participant
@dmb
Hi Mick,

Stuff the postage, put them on shopping list for xbns., e.g., Guildford next weekend, Bristol in Aug.

If you live near enough, Ardingly showground also next weekend – lots of micellaneous stands there. Bound to be one flogging black rings.

John
2 July 2012 at 14:45 #93546
Gordon W
Participant
@gordonw
I usually get this sort of thing at the local garage (Car repair ) or tractor place. Generally have selection boxes and different materials.
2 July 2012 at 15:33 #93548
Phil Ashman
Participant
@philashman88468
I've bought O rings from this company,

**LINK**

I think they come in bags of 20, but they're not too expensive, about £7 for 9.5mm.

Phil
2 July 2012 at 16:22 #93549
Mike p
Participant
@mikep
Hi, I have just looked in Blackgates Engineering catalogue and find the 3/8" od listed at 36p. I have used them before and found them most helpful. My catalogue is for 2009 I doubt they have increased by much. Their phone No. is 01924 466000 or http://www.blackgates.co.uk

Mike p

Edited By Mike p on 02/07/2012 16:30:35
2 July 2012 at 16:42 #93551
mick
Participant
@mick65121
Thanks to all, knew I could count on the collective grey matter as usual.

Mick
2 July 2012 at 18:00 #93554
Jon
Participant
@jon
Depends what you want and where you get them from, the sizes are nearly all different even though conform to BS.

How many do you want in nitrile or viton and cross section? i can post you some.
2 July 2012 at 21:47 #93574
Sub Mandrel
Participant
@submandrel
Try screwfix or machine mart for selection boxes for abouit £5-7. IIRC they are metric, but in small steps so you will probably find one you can use with little adjustment.

Chronos do better quality ones in small quantities.

Neil
2 July 2012 at 22:39 #93576
Gordon A
Participant
@gordona
Greetings Mick,

You could maybe take a look at this place. Not used them myself, but they appear to have a good range of products.

http://www.polymax.co.uk/

Gordon.
Author

Posts