Cylinder Drain Cocks for 7 1/4 Highlander

Cylinder Drain Cocks for 7 1/4 Highlander

This topic has 3 replies, 2 voices, and was last updated 12 February 2011 at 21:12 by Adrian Thompson.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
12 February 2011 at 20:39 #63991
Adrian Thompson
Participant
@adrianthompson73584
Hi Lads, on the drawings for Highlander, the cylinder Drain cocks are 3/16+40, are these ok for a 7 1/4 loco or are they too small ,if so, Please could you advise, many thanks
Advert

12 February 2011 at 20:39 #21796
Adrian Thompson
Participant
@adrianthompson73584
12 February 2011 at 20:57 #63992
Alan Worland 1
Participant
@alanworland1
I know its not a loco, but my Stuart No 4 that I am building uses this size and is 1.5 bore and 1.25 stroke

Not sure if this relavent!
12 February 2011 at 21:12 #63993
Adrian Thompson
Participant
@adrianthompson73584
Hi Alan, many thanks for the reply, the bore on the loco is much bigger, she;s 2-1/4, but again, many thanks.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Redwing
  Started by: grubscrew in: Stationary engines
- 2
- 2
- 23 December 2024 at 18:36
  JasonB
- Replacement Motor Wiring
  Started by: Gary Lynch in: General Questions
- 4
- 6
- 23 December 2024 at 18:32
  Charles Lamont
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 3 4
  Started by: Neil Wyatt in: Model Engineer.
- 45
- 98
- 23 December 2024 at 18:30
  Fowlers Fury
- Warco WM290V and ELS
  Started by: Steven Shand in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 13
- 23 December 2024 at 18:24
  Robert Atkinson 2
- How would you do this?
  Started by: moonman in: Beginners questions
- 8
- 9
- 23 December 2024 at 16:58
  Vic
- Clocks of Paris
  Started by: Vic in: The Tea Room
- 1
- 1
- 23 December 2024 at 16:52
  Vic
- greetings
  Started by: bricky in: The Tea Room
- 6
- 6
- 23 December 2024 at 16:50
  Plasma
- Drilling holes in boiler banding.
  Started by: Michael Callaghan in: Hints And Tips for model engineers
- 10
- 17
- 23 December 2024 at 15:45
  JasonB
- ELS for BOXFORD AUD 1 2 3
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 17
- 59
- 23 December 2024 at 14:52
  mgnbuk
- Forum Post downloads to user
  Started by: Speedy Builder5 in: Website Questions, Comments, and Suggestions
- 5
- 8
- 23 December 2024 at 13:49
  Michael Gilligan
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 8
- 9
- 23 December 2024 at 11:53
  Howard Lewis
- Help for DIY lathe build.
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 11
- 12
- 23 December 2024 at 11:44
  Howard Lewis
- Warco 720 1 2
  Started by: Mick Bailey in: Manual machine tools
- 12
- 29
- 23 December 2024 at 11:44
  mgnbuk
- New member from belgium
  Started by: davp1971 in: Introduce Yourself – New members start here!
- 3
- 3
- 23 December 2024 at 11:02
  Howard Lewis
- Stuart Steam Boiler Feed Pump – Cylinder Scrapped
  Started by: David Deaville in: General Questions
- 6
- 7
- 23 December 2024 at 10:26
  noel shelley
- How to sort this problem out.
  Started by: Michael Callaghan in: Workshop Techniques
- 9
- 11
- 22 December 2024 at 23:11
  Mick Bailey
- Recommissioning a small vertical boiler
  Started by: Mark Salzedo 1 in: General Questions
- 7
- 18
- 22 December 2024 at 19:24
  Mark Salzedo 1
- Dial gauge troubles
  Started by: Roger Hart in: Workshop Tools and Tooling
- 9
- 13
- 22 December 2024 at 14:35
  Mick B1
- L5 issue
  Started by: Neil Taylor in: Beginners questions
- 6
- 11
- 22 December 2024 at 10:43
  Emgee
- Model Engineering Survey – What Do YOU make? 1 2 3 4
  Started by: SillyOldDuffer in: General Questions
- 52
- 80
- 21 December 2024 at 23:01
  SillyOldDuffer
- Microscope marking objective
  Started by: old mart in: Clocks and Scientific Instruments
- 6
- 16
- 21 December 2024 at 20:48
  old mart
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 1
- 1
- 21 December 2024 at 20:18
  old mart
- Some VERY interesting LED modules 1 2 … 5 6
  Started by: Michael Gilligan in: Electronics in the Workshop
- 18
- 131
- 21 December 2024 at 19:23
  SillyOldDuffer
- 775 Motor based Dynamo ? 1 2
  Started by: JasonB in: Miscellaneous models
- 6
- 47
- 21 December 2024 at 18:48
  JasonB
- Sable 2015 Desktop CNC / engraver
  Started by: Bazyle in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 17
- 21 December 2024 at 17:54
  John Haine

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4758

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies