Deckel SO Cutter Grinder

Deckel SO Cutter Grinder

This topic has 4 replies, 4 voices, and was last updated 15 May 2014 at 07:54 by Neil Lickfold.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
14 May 2014 at 16:12 #152473
michael cole
Participant
@michaelcole91146
In a earlier thread there was some talk about people buying these type of grinders as general tool and cutter grinders, when in fact they are designed just readly for single lip cutters.

I have found a website

http://www.thetoolanddieguy.com/

that is currently running a seriesof videos on setting up and using the Deckel SO cutter grinder He also has a large number of videos on surface grinder and much more.

It is a pay site, you have to pay to register, but I have found it very useful.

Mike
Advert

14 May 2014 at 16:12 #21518
michael cole
Participant
@michaelcole91146
14 May 2014 at 16:28 #152479
Clive Hartland
Participant
@clivehartland94829
You can use the Deckel grinder for small diameter 2 and 4 lip milling cutters but there is only a single relief angle. I did not find it that useful as I needed to sharpen larger cutters than 5 or 6mm. I certainly would not waste my money on such an expensive machine which after all is basically an engraving tool sharpener.

Clive
14 May 2014 at 19:57 #152487
Jo
Participant
@jo
I made a set of sleeves for my old one and used to sharpen the ends faces on cutters up to 20mm. No good for sharpening the sides. You can do two angles, it just takes two passes. You can also make/sharpen ball nose cutters. And of course the original engraver bits it was designed for.

I sold mine, decided to keep the Union cutter grinder much more versatile.

Jo
15 May 2014 at 07:54 #152514
Neil Lickfold
Participant
@neillickfold44316
I really like the D bit grinders, there is so much that can be done with single lip cutters.

If you get the double sided wheels in either diamond or cbn, the you can grind thread cutting tools and the like. Also do bull nose radius cutters( offset corner radius cutters)

I have been looking for one, but they are too expensive even second hand. The cheap import ones are not as good as a Deckel.

Neil
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Harrogate 2025 ??
  Started by: Kevin Hunter in: Exhibitions, Shows and Club Events
- 4
- 4
- 14 January 2025 at 22:57
  Nigel Graham 2
- Refurbishing alloy wheels
  Started by: Mike Crossfield in: The Tea Room
- 7
- 7
- 14 January 2025 at 22:56
  Fulmen
- Subscriptions – Going Forward 1 2 … 4 5
  Started by: JasonB in: Subscription issues and Digital magazines
- 36
- 113
- 14 January 2025 at 22:43
  Ian P
- Tool height: Glanze parting tool in Myford S7
  Started by: gabrielb in: Workshop Tools and Tooling
- 7
- 9
- 14 January 2025 at 22:33
  Howard Lewis
- Had Another Go 1 2 … 6 7
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 19
- 157
- 14 January 2025 at 22:28
  Nigel Graham 2
- Unkown micrometer manufacturer 1 2
  Started by: Tomk in: Workshop Tools and Tooling
- 15
- 45
- 14 January 2025 at 22:25
  Grindstone Cowboy
- Internal thread & taper in same hole
  Started by: Dell in: Workshop Techniques
- 10
- 24
- 14 January 2025 at 22:18
  Howard Lewis
- Coal 1 2
  Started by: Michael Callaghan in: General Questions
- 22
- 45
- 14 January 2025 at 22:13
  Howard Lewis
- New Member
  Started by: gabrielb in: Introduce Yourself – New members start here!
- 3
- 3
- 14 January 2025 at 21:53
  Howard Lewis
- leaded mild steel.
  Started by: mark smith 20 in: Materials
- 3
- 3
- 14 January 2025 at 21:28
  Martin Kyte
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 7
- 19
- 14 January 2025 at 17:46
  Harry Wilkes
- Fitting chucks to 7 x 12 type baby lathes
  Started by: old mart in: Manual machine tools
- 5
- 9
- 14 January 2025 at 16:40
  old mart
- Bronze round tube
  Started by: jefferybond in: Materials
- 4
- 4
- 14 January 2025 at 16:29
  old mart
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 9 10
  Started by: Neil Wyatt in: Model Engineer.
- 60
- 226
- 14 January 2025 at 15:46
  JasonB
- Weiss 290 Lathe Power Issue
  Started by: thisdesignedthat in: Manual machine tools
- 6
- 12
- 14 January 2025 at 15:05
  thisdesignedthat
- Reilang Oil Can washer?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 6
- 12
- 14 January 2025 at 14:15
  Chris Kaminski
- Francis W Shaw bench planer
  Started by: Rob Gough in: Manual machine tools
- 8
- 22
- 14 January 2025 at 14:08
  Rob Gough
- Editing an STL file
  Started by: Paul L in: CAD – Technical drawing & design
- 9
- 17
- 14 January 2025 at 12:36
  Another JohnS
- Powder coating
  Started by: John MC in: The Tea Room
- 8
- 9
- 14 January 2025 at 11:47
  Paul Mills 4
- Myford Super 7 questions
  Started by: davp1971 in: Help and Assistance! (Offered or Wanted)
- 4
- 5
- 14 January 2025 at 11:19
  JohnF
- Myford Super 7 clutch
  Started by: john fletcher 1 in: Help and Assistance! (Offered or Wanted)
- 8
- 11
- 14 January 2025 at 10:39
  john fletcher 1
- Mobile workshop
  Started by: Sonic Escape in: The Tea Room
- 9
- 13
- 13 January 2025 at 22:57
  Sonic Escape
- A rather old contributor
  Started by: Sam Stones in: The Tea Room
- 8
- 9
- 13 January 2025 at 22:11
  Sam Stones
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 328
- 13 January 2025 at 21:16
  Brian Abbott
- Mill Power feed unit. 1 2 3
  Started by: Taf_Pembs in: Manual machine tools
- 21
- 58
- 13 January 2025 at 15:47
  old mart

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies