Stirling regulator stuck

Stirling regulator stuck

This topic has 3 replies, 2 voices, and was last updated 16 February 2022 at 20:14 by Michael Callaghan.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
16 February 2022 at 19:59 #585786
Michael Callaghan
Participant
@michaelcallaghan68621
Hi, can anyone help here. The regulator is completely stuck on my Stirling. Unlike other locomotives I can’t see much by looking inside the boiler from the dome. So is there a way of freeing the regulator without taking it all apart. Thanks
Advert

16 February 2022 at 19:59 #2119
Michael Callaghan
Participant
@michaelcallaghan68621
16 February 2022 at 20:07 #585791
Mikelkie
Participant
@mikelkie
Could be that the regulator was left shut when last used, try filling boiler with boiling water and that the expansion might free it. Worked once for me. I always make sure that the reg and all valves are open when cooling.Good luck.
16 February 2022 at 20:14 #585794
Michael Callaghan
Participant
@michaelcallaghan68621
Thanks, will give it a go.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- boring for crankshaft
  Started by: bricky in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 3 March 2025 at 23:20
  Peter Cook 6
- Case hardening
  Started by: Garry Coles in: General Questions
- 7
- 10
- 3 March 2025 at 21:41
  Fulmen
- What’s this for…no.8?
  Started by: beeza650 in: Beginners questions
- 9
- 16
- 3 March 2025 at 21:38
  Georgineer
- A” WEAVER “1CC DIESEL ENGINE 1 2
  Started by: KEITH BEAUMONT in: I/C Engines
- 8
- 29
- 3 March 2025 at 21:24
  jimbo7636
- Warco WM18B CNC conversion
  Started by: Tomek in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 18
- 3 March 2025 at 20:56
  Tomek
- Use of a weighted cord for bullwheel indexing.
  Started by: Greensands in: Workshop Techniques
- 8
- 10
- 3 March 2025 at 20:51
  John Purdy
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 5
- 5
- 3 March 2025 at 20:41
  old mart
- Lead-sheathed wiring – why? 1 2
  Started by: gerry madden in: Materials
- 24
- 28
- 3 March 2025 at 20:36
  old mart
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 14
- 23
- 3 March 2025 at 20:23
  Julie Ann
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 14
- 32
- 3 March 2025 at 20:13
  old mart
- Another lidl picture fail
  Started by: Ian Parkin in: The Tea Room
- 4
- 5
- 3 March 2025 at 19:25
  V8Eng
- Taig lathe DC motor 1 2
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 10
- 26
- 3 March 2025 at 19:15
  John Haine
- Continuing the Television theme …
  Started by: Michael Gilligan in: Electronics in the Workshop
- 7
- 13
- 3 March 2025 at 18:17
  Michael Gilligan
- Dr Schlesinger
  Started by: ryan.carter848 in: Books
- 4
- 5
- 3 March 2025 at 11:58
  Phil P
- Windows 11 Upgrade – non compliant machines.
  Started by: Peter Cook 6 in: The Tea Room
- 6
- 7
- 3 March 2025 at 10:01
  Howi
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 7
- 12
- 3 March 2025 at 09:13
  Circlip
- Slow Again? 1 2
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 23
- 50
- 3 March 2025 at 08:17
  SillyOldDuffer
- Always be careful
  Started by: Blue Heeler in: The Tea Room
- 2
- 2
- 3 March 2025 at 08:06
  Nealeb
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 12
- 20
- 2 March 2025 at 21:21
  Fulmen
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 14
- 16
- 2 March 2025 at 19:24
  flatline
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 9
- 20
- 2 March 2025 at 19:19
  Colin Bishop
- Whistling TV
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 5
- 7
- 2 March 2025 at 16:54
  Speedy Builder5
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 54
- 172
- 2 March 2025 at 15:18
  JasonB
- What’s this for…no.7?
  Started by: beeza650 in: Beginners questions
- 5
- 8
- 2 March 2025 at 15:17
  beeza650
- Ford Transit
  Started by: Vic in: The Tea Room
- 8
- 14
- 2 March 2025 at 15:03
  Trevor Drabble 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies