WM250V Delrin Change gears

WM250V Delrin Change gears

This topic has 4 replies, 4 voices, and was last updated 8 January 2022 at 12:31 by Ronald Morrison.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
7 January 2022 at 21:12 #579162
Bernard Reilly
Participant
@bernardreilly64467
HI All can anyone inform me off a a supplier for a set of change feed unit gears for a new Warco WM250V lathe. I had a set made for me by you-engraving for a WM180 lathe they worked a treat. however I am not getting a reply from my e mail contact with them. The cast iron gears supplied with my lathe are causing an infernal din made worse by my two hearing aids.

Thank you B Reilly Glasgow
Advert

7 January 2022 at 21:12 #20568
Bernard Reilly
Participant
@bernardreilly64467
7 January 2022 at 21:21 #579163
Mick B1
Participant
@mickb1
Are you setting them with paper to get the mesh correct? My iron gears run with a pleasant hum, not uncomfortably loud.
7 January 2022 at 21:24 #579164
Gavlar
Participant
@gavlar
'You-engraving' is still supplying delrin gears. I got a set from him only a couple of weeks ago and he is still advertising on ebay.

Have you tried contacting him through ebay rather than email?
8 January 2022 at 12:31 #579230
Ronald Morrison
Participant
@ronaldmorrison29248
Your email to them may have inadvertantly ended up in their spam folder and discarded. If you email them again it will likely go directly to their spam folder again. I agree, try to contact them through Ebay.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- A Marine Condensing Engine 1 2 … 4 5
  Started by: Ramon Wilson in: Work In Progress and completed items
- 24
- 123
- 19 February 2025 at 08:19
  JasonB
- Searching for 125mmish cast iron handweels with 1″ bore
  Started by: pgrbff in: Workshop Tools and Tooling
- 7
- 12
- 19 February 2025 at 07:55
  pgrbff
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 2
- 2
- 19 February 2025 at 07:50
  Hollowpoint
- Milling machine advice circa £2500
  Started by: aytact in: Beginners questions
- 9
- 12
- 19 February 2025 at 07:22
  Hollowpoint
- Vickers Inverted Engine 1 2
  Started by: JasonB in: Stationary engines
- 10
- 33
- 19 February 2025 at 07:06
  JasonB
- NEW LOOK – Model Engineer & Workshop 1 2 … 5 6
  Started by: sohara in: Model Engineer & Workshop
- 44
- 134
- 19 February 2025 at 07:02
  JasonB
- Clock Repair is my passion
  Started by: simonhenry700 in: Introduce Yourself – New members start here!
- 7
- 10
- 19 February 2025 at 06:46
  simonhenry700
- Bit of a con or sharp practice on water filters.
  Started by: Robert Atkinson 2 in: The Tea Room
- 15
- 19
- 18 February 2025 at 23:42
  Nigel Graham 2
- Are Stan Bray’s Optical centre punch dimensions correct?
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 2
- 5
- 18 February 2025 at 21:23
  Andrew Tinsley
- Heavier Spindle on Fox Alien
  Started by: IanT in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 4
- 11
- 18 February 2025 at 19:52
  IanT
- Raglan vertical milling machine
  Started by: roger kerry in: Manual machine tools
- 5
- 8
- 18 February 2025 at 19:52
  geoff warner 1
- Lead-sheathed wiring – why? 1 2
  Started by: gerry madden in: Materials
- 23
- 27
- 18 February 2025 at 16:30
  Stuart Smith 5
- Can a metric baby do imperial? 1 2 3 4
  Started by: beeza650 in: Beginners questions
- 29
- 80
- 18 February 2025 at 10:37
  Graham Meek
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 32
- 17 February 2025 at 18:39
  Fulmen
- Toolmakers clamps
  Started by: Wade Beatty in: Workshop Tools and Tooling
- 5
- 5
- 17 February 2025 at 16:33
  Martin Connelly
- Securing smokebox number plate
  Started by: Derek Drover in: General Questions
- 8
- 10
- 17 February 2025 at 15:01
  duncan webster 1
- Taig lathe DC motor
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 8
- 18
- 17 February 2025 at 13:36
  Peter Cook 6
- Archive access going forward
  Started by: Peter Cook 6 in: Subscription issues and Digital magazines
- 6
- 8
- 17 February 2025 at 13:36
  Michael Gilligan
- Mens Shed
  Started by: Simon Neath 2 in: General Questions
- 11
- 13
- 17 February 2025 at 12:50
  modeng2000
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 7
- 12
- 17 February 2025 at 11:09
  Dave Halford
- Retrofitting Houses
  Started by: Michael Gilligan in: The Tea Room
- 1
- 1
- 17 February 2025 at 10:39
  Michael Gilligan
- Meddings Overhaul – missing parts
  Started by: Woodlikesbikes in: Manual machine tools
- 9
- 15
- 17 February 2025 at 08:54
  Michael Gilligan
- Diamond Wheel dressing attachment
  Started by: David George 1 in: Help and Assistance! (Offered or Wanted)
- 10
- 18
- 17 February 2025 at 08:36
  ryan.carter848
- Electric Car Battery Retention 1 2 3
  Started by: Vic in: The Tea Room
- 26
- 52
- 16 February 2025 at 22:42
  not done it yet
- ML7 cross-slide problem
  Started by: Mike Joseph in: Workshop Tools and Tooling
- 4
- 5
- 16 February 2025 at 19:04
  Mike Joseph

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies