Chris

The Hofmann rotary table was available in two guises, one has division plates and the other has a normal graduated hand wheel.

I have the 8" division plate version myself and agree with you that it is a superbly made bit of kit.

When you get one, let me know and I will send you a spead sheet showing all the available divisions and the number of holes in the plates etc.

There is a 10" one on ebay just now.

Phil

Edited By Phil P on 07/07/2019 22:11:34

I have the 8” with plates. Don’t use the plates often but easy to fit,  otherwise they normally they get  in the way but ok when used.  I would have liked it to work in vertical mode, but I have a good vertex dividing head so no problem here.   it’s certainly is a brilliant bit of kit. The thrust bearing under the table is huge. It’s smooth and accurate. Best bit of kit I have. Same t slots as a myford, but parallel 20 mm bore centre. So no mounting stubby morse tapers  but I now have a range of dedicated centres..

a fantastic bit of kit and well worth 5he money Was standard kit fir Bridgeport’s

Edited By Zan on 07/07/2019 23:39:31