Mmm, from the page source it seems like your pics are on Photobucket, at:

**LINK**

Way I did it was to use Photobucket's 'get link codes' button, then 'direct' and copy the code there. Then go back to the forum and hit the image button, paste into the URL line, and hit OK.

Looks like a useful milling set-up.

Edited By Bikepete loadsa times, most recently on 18/03/2015 15:49:30

Edited By Bikepete on 18/03/2015 15:51:49

Manual

http://www.emco.or.at/index.php/downloadneu/doc_view/48-emco-unimat-sl-english

Parts list

http://www.emcomachinetools.co.uk/LinkClick.aspx?fileticket=LY50fXNfWJs%3d&tabid=260&language=en-GB

Intro vid – the bit you have is actually for drilling not milling it seems – in fact yours looks like a very cut down version.

Edited By Bikepete on 18/03/2015 16:00:13

Edited By Bikepete on 18/03/2015 16:05:54

Neil, that advice could do with cleaning up – specificially, it would be less confusing if you deleted your initial suggestion of stripping out tags etc., and all of the subsequent discussion, and just left the post from JasonB at
02/01/2015 13:50:18 which shows how to do it the easy way. For a proper job you could edit it to be self-contained i.e. not referring to other unspecified threads.

In fact, if that thread is supposed to be a useful help reference, I'd suggest deleting all extraneous discussion and just leave the advice posts.