Wm 14 Suitable machine vice

Wm 14 Suitable machine vice

This topic has 3 replies, 3 voices, and was last updated 16 October 2014 at 16:02 by Nick_G.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
16 October 2014 at 14:50 #166671
Bernard Reilly
Participant
@bernardreilly64467
Hi all I have a precision vice purchased from Arc Euro for my WM14. A very well constructed item but I find the clamping method very fiddly. I a bit disappointed that despite the pull down action of the moving jaw I still require to tap the work piece down in order to seat on my parallels. So am I doing something wrong?

Also is there an equivalent low level vice suitable for this little machine.

Thank you B Reilly Glasgow
Advert

16 October 2014 at 14:50 #17525
Bernard Reilly
Participant
@bernardreilly64467
16 October 2014 at 15:03 #166672
martin perman 1
Participant
@martinperman1
Bernard,

As an apprentice many moons ago one of the things we learned was that after we had clamped the job in a vice we had to tap the work piece down onto the parallels to make sure it was seated properly, I have done this ever since with what ever vice I have used, you could also check the keep plate underneath and see what the play is between the jaw and the slot it rides in and reduce this a little.

Martin P
16 October 2014 at 16:02 #166678
Nick_G
Participant
@nick_g
.

This guy always taps the work down at each stage in this youtube video demonstration :-

**LINK**

Nick
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Metal strands in graphite packing
  Started by: Tony Rowe 1 in: Beginners questions
- 5
- 5
- 27 February 2025 at 14:48
  duncan webster 1
- Scam – Close but no Cigar!
  Started by: Chris Crew in: The Tea Room
- 4
- 4
- 27 February 2025 at 14:34
  Nicholas Farr
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 5
- 5
- 27 February 2025 at 13:51
  Fulmen
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 9
- 14
- 27 February 2025 at 13:37
  JasonB
- Workshop wiring
  Started by: robin coleman in: Beginners questions
- 9
- 11
- 27 February 2025 at 12:50
  Robert Atkinson 2
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 13
- 19
- 27 February 2025 at 12:22
  Howard Lewis
- Source for trangular carbide inserts.
  Started by: Andrew Tinsley in: General Questions
- 8
- 13
- 27 February 2025 at 11:59
  Howard Lewis
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 13
- 18
- 27 February 2025 at 11:50
  John MC
- Best way to wire up 4 motors to a 4QD controller
  Started by: Michael Callaghan in: Locomotives
- 5
- 6
- 27 February 2025 at 09:29
  Michael Gilligan
- WM14 mill/drill gears
  Started by: michael howarth 1 in: General Questions
- 2
- 5
- 27 February 2025 at 09:06
  michael howarth 1
- What steel
  Started by: Peter Simpson 3 in: Beginners questions
- 5
- 6
- 27 February 2025 at 08:48
  Hollowpoint
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 6
- 8
- 27 February 2025 at 06:56
  Plasma
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 39
- 26 February 2025 at 20:33
  Fulmen
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 7
- 26 February 2025 at 20:32
  celso ari schlichting
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 67
- 26 February 2025 at 18:41
  JasonB
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 4
- 4
- 26 February 2025 at 18:21
  Dave S
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 21
- 35
- 26 February 2025 at 18:14
  bernard towers
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 5
- 9
- 26 February 2025 at 17:30
  robin coleman
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 70
- 286
- 26 February 2025 at 16:14
  Michael Gilligan
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 16
- 26 February 2025 at 13:56
  Michael Gilligan
- For BTInternet Users: Safe Domain / Sender Lists?
  Started by: Nigel Graham 2 in: The Tea Room
- 2
- 2
- 26 February 2025 at 13:18
  Peter Cook 6
- New Member Paul
  Started by: paul richardson 1 in: Introduce Yourself – New members start here!
- 2
- 2
- 26 February 2025 at 12:13
  JasonB
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD!
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 9
- 24
- 26 February 2025 at 10:58
  Nicholas Farr
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 10
- 23
- 26 February 2025 at 09:36
  rjenkinsgb
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 13
- 31
- 26 February 2025 at 09:12
  Michael Gilligan

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies