Knurling tool shank size

Knurling tool shank size

This topic has 3 replies, 3 voices, and was last updated 25 February 2014 at 21:30 by Roderick Jenkins.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
25 February 2014 at 20:15 #145145
Mike Teaman
Participant
@miketeaman64279
I bought myself a knurling tool but when it arrived, the shank is too big to fit in the opening of my tool holder. Any suggestions?
Advert

25 February 2014 at 20:15 #17318
Mike Teaman
Participant
@miketeaman64279
Slimming?
25 February 2014 at 20:23 #145146
JasonB
Moderator
@jasonb
1. Send it back and buy a smaller one

2. Buy a bigger tool holder/post

3. see how hard the shank is and machine it down if possible

J
25 February 2014 at 21:30 #145151
Roderick Jenkins
Participant
@roderickjenkins93242
I used to take the Dickson toolpost off and use the original clamp onto the topslide but now mine lives in the Gibralter toolpost.

Rod
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD!
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 8
- 23
- 26 February 2025 at 10:54
  John Haine
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 9
- 9
- 26 February 2025 at 10:41
  vic newey
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 20
- 34
- 26 February 2025 at 10:37
  peterhod
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 56
- 26 February 2025 at 10:12
  JasonB
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 2
- 4
- 26 February 2025 at 09:56
  JasonB
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 4
- 5
- 26 February 2025 at 09:52
  noel shelley
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 10
- 23
- 26 February 2025 at 09:36
  rjenkinsgb
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 13
- 31
- 26 February 2025 at 09:12
  Michael Gilligan
- Metal spinning a deep cup
  Started by: Oily Rag in: Workshop Techniques
- 13
- 15
- 26 February 2025 at 08:58
  Trevor Drabble 1
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 5
- 6
- 26 February 2025 at 08:49
  Dell
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 4
- 4
- 26 February 2025 at 08:27
  HOWARDT
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 69
- 280
- 26 February 2025 at 07:45
  pennyblack
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 3
- 3
- 25 February 2025 at 21:44
  Nigel Graham 2
- Harrison Milling Machines
  Started by: MARK RIGG in: Manual machine tools
- 3
- 5
- 25 February 2025 at 20:41
  Chris Crew
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 38
- 25 February 2025 at 20:03
  Fulmen
- Centec 2B fast traverse ideas
  Started by: Graham Horne 2 in: Manual machine tools
- 8
- 9
- 25 February 2025 at 19:41
  peak4
- Lathe help information 1 2
  Started by: maccecht in: Help and Assistance! (Offered or Wanted)
- 14
- 27
- 25 February 2025 at 18:46
  Pete Rimmer
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 12
- 25 February 2025 at 17:00
  John Haine
- Centec 2b mill rebuild
  Started by: Graham Horne 2 in: Manual machine tools
- 4
- 11
- 25 February 2025 at 16:47
  Graham Horne 2
- Midlands Garden Rail Show 2025 – 1st & 2nd March – this weekend!
  Started by: Meridienne Exhibitions 1 in: Exhibitions, Shows and Club Events
- 1
- 1
- 25 February 2025 at 12:46
  Meridienne Exhibitions 1
- Harrison Universal Milling Machine Feed Gears & 3Phase
  Started by: Steve Taylor 2 in: Workshop Tools and Tooling
- 15
- 25
- 25 February 2025 at 11:47
  MARK RIGG
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 10
- 11
- 25 February 2025 at 10:40
  John Haine
- Which “silent” air compressor shall I get? 1 2
  Started by: beeza650 in: Workshop Tools and Tooling
- 20
- 28
- 25 February 2025 at 09:36
  noel shelley
- What’s this for?
  Started by: beeza650 in: Beginners questions
- 18
- 24
- 25 February 2025 at 09:09
  Clive Foster
- New member – garage tinkerer
  Started by: spencerd72 in: Introduce Yourself – New members start here!
- 4
- 4
- 25 February 2025 at 04:56
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies