Hi Stewart

I have fitted a QCTP to my WM250 V-F, there needs to be some modification to the compound slide to allow fitting. Considering your machine still has a 12 mo. warranty I wouldn't go down this route just yet, Warco consider any removal of screws / smallest modification etc.. during the first year tantamount to voiding warranty. I would get the specific QCTP that Warco offers & then you can have an extra chuck & knurling tool.

I have 3 chucks in all for my lathe, a 0 – 8 mm & 1 – 16 mm keyless plus the original supplied 1 – 13 chuck plus a couple of keyed chucks around the man cave for my mill & drilling machines, plus a couple of smaller ones taken off old hand / portable drills ( Hmm these will come in handy for something… ) I also have 3 knurling tools, 2 clamp types & one 2 wheel push style… you can never have enough gear in your cave, so for the moment I suggest you get the Warco QCTP if you can afford to.. they will probably say that it will have to be machined to suit your machine (at extra cost! ) as I asked the same question last year when I bought mine, other members may offer a different opinion so you can formulate your own decision. I have a couple of pics in my albums for you to look at if you wish. Drop me a pm if I can help with anything.Happy machining.

Regards

George

As soon as you see a knurling tool includied in the set be suspicious it is one of the really crap filed out of ox dung and painted black rubbish cheapo sets even if marked up to match better ones. Adding a drill chuck is a new low in tempting the unwary as never in a month of Sundays do you need a drill chuck on the tool post.

Given that you really really really don't need a QCTP i suggest saving up for the better style ( ie not painted black) that cost 50% more but are worth twice as much. Not exactly sure of your lathe size but probably you want the size offered for a Myford or Boxford rather than thinking it has to be as specified for your particular lathe.

Interesting comments on QCTPs and their quality!

I keep wondering about one for my Engineers Tool Room BL12 -24 (Warco BH600/Chester Craftsman lookalike).

But having managed with three tools in the Front 4 way, and another three in my home made 4 way Back Toolpost, for ten years, maybe the need is not really that great, and a spend circa £250 is a bit off putting.

(I made a tool height setting gauge to speed/ease setting Front and rear mounted tools to centreline)

Also, my shop being compact/congested (take your choice) where would I store the spare holders?

The shelf above/behind the lathe already carries Drill Chucks, Running Centre, Faceplate, Catch Plate Steadies, and Collet Chucks, so no room there. And don't even think about the storage spaces beneath – already fully used!

So votes For, and who Against please.

Howard

The Warco toolpost seems to be on permanent backorder, so I looked for an alternative. The closest I could get was the HBM 51mm QCTP from RDG, which was a bit of a gamble as I didn't have any detailed specs for it.

As it turns out, it only needs one small mod, the bore in the base is the right diameter to fit the cross slide stud but isn't deep enough. It needs to be deepened by about 3-4mm. The stud is also a bit short and might benefit from being longer but it seems to hold well enough. The 4-wayrotation lock pin will need to be removed as it's redundant – plus the removal of the screw that holds this in stops it fouling the chuck on close facing operations.