Clarkson 8mm Autolock S Type Collet Small

Advert

New Replies

Report Bug

Help/FAQs

Clarkson 8mm Autolock S Type Collet Small

This topic has 10 replies, 7 voices, and was last updated 2 March 2014 at 21:56 by John Baldwin 1.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
18 December 2012 at 19:15 #106708
Graham Wharton
Participant
@grahamwharton
Hello all,

Quick one…..Has anyone ever come across a Clarkson Small SType Autolock Collet in 8mm. They appear to be as rare as rocking horse sh*t.

Thanks

Graham
Advert

18 December 2012 at 19:15 #16959
Graham Wharton
Participant
@grahamwharton
18 December 2012 at 19:29 #106709
Tony Pratt 1
Participant
@tonypratt1
Hi Graham, I don't think they exist as threaded shank cutters in the small diameter range come with 6mm, 10mm, 1/4" & 3/8" shank diameters.

Tony
18 December 2012 at 19:41 #106710
Graham Wharton
Participant
@grahamwharton
I too thought they never existed too however I recently came across a cutter in my garage (which I can no longer remember or find….typical) that was an 8mm threaded shank.

http://www.cromwell.co.uk/CTL0627010Y

Clarkson part number 40M92

A skip through clarkson and dormer cutter catalogues and I cant find any tooling that is 8mm threaded shank.
18 December 2012 at 22:04 #106719
Deltic007
Participant
@deltic007
Try Flea Bay
19 December 2012 at 11:03 #106740
Ian S C
Participant
@iansc
My Clarkson has collets for 1/4" 5/16" 3/8" 7/16" 1/2" 5/8", And I made one for 3/4". Ian S C
19 December 2012 at 18:47 #106759
Michael Gilligan
Participant
@michaelgilligan61133
Graham,

Unfortunately this leaflet on the "S" makes no mention of 8mm

… although I do vaguely recall that the "S" was updated at some time; so there may still be a chance.

MichaelG.
19 December 2012 at 19:04 #106761
Graham Wharton
Participant
@grahamwharton
Ive had a saved search worldwide on ebay for about 8 months now, and nothing has ever triggered it.

I think i'll just go hunt the 8mm shank cutter, and throw it if I find it (although I guess I can still use it in my ER32s )

If you look at the metric part numbers, the 6,10,12,16 are all sequential numbers, with the 8mm having a somewhat higher number, which would support Michaels thought about an update to the range.

I am however more looking to satisfy my major tool OCD.

I currently have

Clarkson S Small 6mm 10mm 12mm 16mm 1/4" 3/8" 1/2" 5/8"

Clarkson S Medium 1"

Clarkson S Large 20mm 25mm 32mm 3/4" 1" 1.1/4"

Does anyone else get tool OCD and collect "Full sets!!!!" regardless of need? (turns out to be quite an expensive thing to do)
19 December 2012 at 20:04 #106772
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Graham Wharton on 19/12/2012 19:04:47:

I think i'll just go hunt the 8mm shank cutter, and throw it if I find it

Graham,

If you do that, you are almost guaranteed to locate an 8mm Collet within the week.

MichaelG.
20 December 2012 at 09:00 #106790
Bazyle
Participant
@bazyle
Graham,
the problem is the varieties one ends up with. Haven't got above S size Clarkson but have 3C, 5C, posilock, clarkson, DA180, some unknowm I got by mistake, so far avoided any ER.
2 March 2014 at 21:56 #145763
John Baldwin 1
Participant
@johnbaldwin1
Hi, I'm new to this forum but 8mm Clarkson Autolock Small S/Type Collet do exist, I have one.. Hopefully I've added a couple of photos to show it.

John B
Author

Posts