what gear?

what gear?

This topic has 5 replies, 4 voices, and was last updated 7 March 2014 at 07:31 by christopher northrop.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
5 March 2014 at 18:37 #15694
christopher northrop
Participant
@christophernorthrop97571
Advert

5 March 2014 at 18:37 #146068
christopher northrop
Participant
@christophernorthrop97571
Hello all, This is my first post so please excuse me if this has been covered before. Ive recently aquired a myford super 7 with gear box. i would like to cut some metric threads so following a thread in the workshop techniques section i fitted a 33 tooth gear on the tumbler stud as per chart the problem i have is the next gear wheel in the train will not engage this gear as the quadrant cut out will not allow the gear wheel to be adjusted down enough. Any advice would be very welcome.
5 March 2014 at 21:02 #146091
Neil Wyatt
Moderator
@neilwyatt
Welcome aboard Chris,

I'm sure someone will be able to advise, but mean while you have a PM.

Neil
5 March 2014 at 21:04 #146092
John Stevenson 1
Participant
@johnstevenson1
Most time the 33 / 34 combination will fit but sometimes the slot of the quadrant is a bit shy on length and has to be cleaned out with a round file.
6 March 2014 at 09:52 #146144
Brian Wood
Participant
@brianwood45127
Chris,

I've sent you a PM

Regards

Brian
7 March 2014 at 07:31 #146259
christopher northrop
Participant
@christophernorthrop97571
Thanks All,

Very helpful info, look forward to swapping tips, etc in the future.

Regards,

Chris.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What Did You Do Today 2025 1 2
  Started by: JasonB in: The Tea Room
- 19
- 49
- 3 February 2025 at 18:07
  Bo’sun
- Email messages on the Forum.
  Started by: Andrew Tinsley in: General Questions
- 3
- 6
- 3 February 2025 at 16:51
  JasonB
- The wonders of AI… 1 2
  Started by: Robin Graham in: The Tea Room
- 15
- 37
- 3 February 2025 at 16:47
  Paul L
- Myford Topslide base casting graduations
  Started by: Martin Kyte in: Workshop Tools and Tooling
- 7
- 10
- 3 February 2025 at 13:39
  Bazyle
- 1911 Harley Davidson 7D twin
  Started by: Luker in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 3 February 2025 at 12:19
  JasonB
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 7
- 9
- 3 February 2025 at 12:18
  Howard Lewis
- Robert Atkinson will be proud of me :) 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 19
- 33
- 3 February 2025 at 11:52
  John MC
- Had Another Go 1 2 … 14 15
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 22
- 356
- 3 February 2025 at 07:49
  David Jupp
- question about correcting error introduced by using straight slide in valve gear
  Started by: Chris Kaminski in: Locomotives
- 4
- 17
- 2 February 2025 at 23:39
  duncan webster 1
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 4
- 6
- 2 February 2025 at 21:54
  Vic
- NEW LOOK – Model Engineer & Workshop 1 2 3 4
  Started by: sohara in: Model Engineer & Workshop
- 36
- 95
- 2 February 2025 at 18:33
  Graham Titman
- Classical architectural detail..
  Started by: Diogenes in: Books
- 2
- 5
- 2 February 2025 at 16:31
  Michael Gilligan
- Build Your Own Metal Working Shop From Scrap (7 book series)
  Started by: Dr_GMJN in: Books
- 5
- 6
- 2 February 2025 at 13:54
  noel shelley
- Alibre Workshop/Meshcam pro
  Started by: Ian McVickers in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 6
- 2 February 2025 at 13:07
  Baz
- Stuart Beam Engine
  Started by: Phil P in: Help and Assistance! (Offered or Wanted)
- 2
- 3
- 2 February 2025 at 12:55
  Phil P
- Square Bed Lathe
  Started by: Clive Foster in: Manual machine tools
- 6
- 8
- 2 February 2025 at 12:29
  bernard towers
- Using Schneider ATV12 with remote terminal VW3A1006.
  Started by: chrismac in: Workshop Tools and Tooling
- 5
- 18
- 2 February 2025 at 11:48
  chrismac
- Totally unacceptable treatment
  Started by: Me. in: General Questions
- 13
- 25
- 2 February 2025 at 11:33
  Vic
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 78
- 2 February 2025 at 10:20
  SillyOldDuffer
- Changes to Well-Known Auction Site
  Started by: Chris Crew in: The Tea Room
- 19
- 25
- 1 February 2025 at 20:10
  Mark Rand
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 9
- 20
- 1 February 2025 at 18:48
  JasonB
- Colchester bantam cross slide
  Started by: Marcel Jolinon in: Manual machine tools
- 3
- 6
- 1 February 2025 at 18:01
  Bazyle
- Early Myford Super-7B gear change wheels??
  Started by: flatline in: Beginners questions
- 8
- 22
- 1 February 2025 at 17:46
  Brian Wood
- Mobile workshop
  Started by: Sonic Escape in: The Tea Room
- 12
- 21
- 1 February 2025 at 17:05
  bernard towers
- building milling machine made from scrap part 1
  Started by: celso ari schlichting in: General Questions
- 1
- 7
- 1 February 2025 at 16:51
  celso ari schlichting

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies