HB961 Digital Readout

Advert

New Replies

Report Bug

Help/FAQs

HB961 Digital Readout

This topic has 7 replies, 5 voices, and was last updated 5 August 2021 at 22:34 by Jacques Van Damme.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
3 August 2021 at 15:53 #556866
Roger Stanton
Participant
@rogerstanton79412
Hello, My first post here, sorrry if its in the wrong section.

I have a HB961 digital readout and Ive tried for a few hours to locate an English datasheet or user manual without success, can anyone point me in the right direction or maybe supply a link or a PDF.

Thanks in Advance

Roger.
Advert

3 August 2021 at 15:53 #15362
Roger Stanton
Participant
@rogerstanton79412
3 August 2021 at 22:36 #556927
Steviegtr
Participant
@steviegtr
Is it a raster table counter. If so try this in a foreign language but all there.

Raster table counter pdf

Steve.
4 August 2021 at 11:48 #556986
Roger Stanton
Participant
@rogerstanton79412
Hi Steve, Many thanks for the datasheet, I can get some info' from it.

When I ordered it I asked them to enclose a datasheet, which they did, but it was in Chinese!!, an order coming from the UK, beats me.

If anyone has an English datasheet I would appreciate a copy please or a link to one.

Best Regards,

Roger
4 August 2021 at 16:29 #557025
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Steviegtr on 03/08/2021 22:36:02:

Is it a raster table counter. If so try this in a foreign language but all there.

Raster table counter pdf

Steve.

.

DeepL seems to make a reasonable job of translating that

… here’s the first paragraph:

Input signal: mechanical contact, pulse (low: -30V~+0.6V high: +4V~+30V)
– External signals: photocell, mechanical contact, inductive sensor, encoder
– Output voltage for sensor supply: 5V DC, 24V DC 30mA – Possibility to set A ratio, B increment,
initial value C and change of decimal point.
– Saving the set parameters in case of power failure.
– Set of 14 output relay modes
– 3 input modes including ascending and descending counting, counting
with phase difference accounting (raster form)

.

MichaelG.

Ref. https://www.deepl.com/translate

Edited By Michael Gilligan on 04/08/2021 16:30:24
4 August 2021 at 17:56 #557039
An Other
Participant
@another21905
Hi Roger,

On Amazon, there is some limited data for this device, and if you scroll down there is a section marked 'Reviews with Images' – this includes a tiny two page data sheet in 'Engrish'. I was able to save this image, paste it into a LibreOffice document, then enlarge it to A4 page size. Naturally this ends up rather indistinct without further processing, but it is just readable – may be some help.

**LINK**

The first part of the 'chinese' document mentioned above is actually Bulgarian, and can be simply copied and pasted into Google Translate, when, as mentioned, it produces a reasonably intelligible output – Ii did try to copy it into here, but although Google produces a fairly well ordered text which is not difficult to read, it loses the formatting when pasted into this message, so difficult to read here.
4 August 2021 at 20:08 #557056
Roger Stanton
Participant
@rogerstanton79412
Hi Michael and An Other,

Many thanks to all, I've now have enough info' to get the unit programmed.

Regards to all.

Roger
5 August 2021 at 22:34 #557219
Jacques Van Damme
Participant
@jacquesvandamme27160
Hi Roger,

You can find the English user manual of the HB961 digital readout on this link:

HB961 counter

In MEW 305, the recent july 2021 issue, page 26, you will find in my contribution how to connect it with a wire encoder. I used it for a DRO for my Myford ML7R lathe, one for the X-axis and one for the Y-axis. They work fine.

Best Regards,

Jacques
Author

Posts