Does anyone have a manual for a Clarkson Grinder

Advert

New Replies

Report Bug

Help/FAQs

Does anyone have a manual for a Clarkson Grinder

This topic has 16 replies, 9 voices, and was last updated 23 April 2023 at 18:47 by Pete Rimmer.

Viewing 17 posts - 1 through 17 (of 17 total)

Author

Posts
7 November 2021 at 21:30 #570360
Mark Davison 1
Participant
@markdavison1
As above, ideally a pdf file. Ive emailed the chap who has bedroom-workshop.com but no reply.
Advert

7 November 2021 at 21:30 #14396
Mark Davison 1
Participant
@markdavison1
7 November 2021 at 21:58 #570365
noel shelley
Participant
@noelshelley55608
Hi Mark I think I sent you a PM a few days ago? and Yes to the question. Check your in box. Noel.
7 November 2021 at 22:01 #570367
Mark Davison 1
Participant
@markdavison1
Found one online
7 November 2021 at 23:27 #570372
peak4
Participant
@peak4
Posted by Mark Davison 1 on 07/11/2021 22:01:31:

Found one online

Where did you spot it, and is there any other related stuff there please?
I do have a manual for mine, so I'm OK there.
I've also tried emailing the chap at Bedroom Workshop to no avail.
In this case I had some literature of my own that I was offering to send him.

Bill
7 November 2021 at 23:38 #570374
Mark Davison 1
Participant
@markdavison1
fdocumemts.net. never used it before. It tries to get you to click all sorts of adverts so look carefully before clicking anything that says download.
8 November 2021 at 09:14 #570393
John Hinkley
Participant
@johnhinkley26699
Glad you're sorted and this has nothing to do with your quest for a manual, but I have also tried twice, unsuccessfully, to contact the bedroom workshop site regarding my Perfecto shaper via the supplied email address xxxx@hotmail.com. It occurs to me that Microsoft seem to have absorbed hotmail into their global empire and maybe an email should now be sent to (name)@outlook.com and the site hasn't been updated to reflect that? I might try that later. However, I would have thought that messages to hotmail.com addresses would have been automatically redirected to outlook.com. Not so, apparently.

John
8 November 2021 at 09:51 #570397
noel shelley
Participant
@noelshelley55608
I also tried to email the fellow at Bedroom Etc 18 months ago, got no reply. It's a pity as it is a good site he;s put a lot of work into. Ah well, Noel.
8 November 2021 at 11:40 #570412
peak4
Participant
@peak4
Posted by noel shelley on 08/11/2021 09:51:35:

I also tried to email the fellow at Bedroom Etc 18 months ago, got no reply. It's a pity as it is a good site he;s put a lot of work into. Ah well, Noel.

One used to be able to download manuals etc from there, but unfortunately, someone did, and then started selling them and listing on ebay, hence the author blocked downloads.
In theory, one could register with him, but it doesn't seem to work.

The Last Update on the site was 30th August 2020, but I'd tried contacting him prior to that, when the site was receiving regular updates.

The same author appears on HomemadeTools.net
https://www.homemadetools.net/builder/Steven+Vine-2

It looks like the site is likely to be around for at least a couple of years.
From Who.is domain mane registration; but no contact details available.

Expires On 2023-10-23
Registered On 2009-10-23
Updated On 2021-09-23-
If anyone really wants to, there is a contact form to the registrant, available on one of the other DNS look-up sites, but I'll not link to it here.

Bill
5 October 2022 at 21:04 #616141
Michael Kitko
Participant
@michaelkitko15068
I too have just purchased a new-to-me Clarkson grinder and would like to find a manual. Can anyone assist me in finding one please? Sorry for the revive of an old thread.
7 October 2022 at 07:34 #616355
Thor 🇳🇴
Participant
@thor
Hi Michael,

You could try this link.

Thor
7 October 2022 at 09:15 #616368
noel shelley
Participant
@noelshelley55608
YES ! I should be able to help you. No need to appologize for an old thread, Noel.
7 October 2022 at 19:18 #616445
Michael Kitko
Participant
@michaelkitko15068
Posted by noel shelley on 07/10/2022 09:15:45:

YES ! I should be able to help you. No need to appologize for an old thread, Noel.

Can you please send me a PM?
23 April 2023 at 18:16 #642360
George Jervis
Participant
@georgejervis86082
Hi

I've been trying to restore a Clarkson cutter grinder that I've been given plus the imperia grinder, would anyone know the length of the flat belt for Clarkson grinder mk1 (March grinder) I have a Manuel but can not see the information? I tried searching the interweb but come up with nothing too?

Any help would be greatly appreciated

Many thanks

George
23 April 2023 at 18:36 #642363
David Davies 8
Participant
@daviddavies8
Hi George

I am rebuilding a mk 1 (very slowly I'm afraid). The flat belt I bought for it is a H1120-25. This is 1120mm long and 25mm wide The H signifies 1mm thick. Mine is an ''Optimax'' made by Optibelt GmbH in ''The Fatherland''

HTH

Dave

BTW other lengths are available, can you check your machine by looping a measuring tape around the pullies?

Edited By David Davies 8 on 23/04/2023 18:42:22

Edited By David Davies 8 on 23/04/2023 18:43:24
23 April 2023 at 18:47 #642365
George Jervis
Participant
@georgejervis86082
Hi Dave,

That's fantastic, thank you so much for the quick response just what I needed, my new challenge after this is to make the 3 phase motor run on single phase with a capacitor, hopefully save me buying new 3 phase converter again,

Many thanks again

George
23 April 2023 at 18:47 #642366
Pete Rimmer
Participant
@peterimmer30576
I once made a belt in a pinch by grinding all of the ribs from poly-vee belt. I do believe that it is still fitted and working on that particular Mk1.
Author

Posts