Colchester chipmaster worm box removal

Advert

New Replies

Report Bug

Help/FAQs

Colchester chipmaster worm box removal

This topic has 10 replies, 6 voices, and was last updated 11 September 2023 at 00:04 by PAUL SOMLO.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
20 April 2018 at 21:47 #350916
Adam
Participant
@adam
Hi everyone. Im rebuilding a Colchester chipmaster which I recently acquired. I have the manual and I’m trying to disassemble the apron. Most of it is away apart from one which is the worm box. It has a bar that slides left to right but it does not slide enough to get the worm box off. It’s hard to explain so I’ll try to get a photo.

Adam
Advert

20 April 2018 at 21:47 #13199
Adam
Participant
@adam
20 April 2018 at 22:17 #350921
Adam
Participant
@adam
20 April 2018 at 22:20 #350922
Adam
Participant
@adam
Basically I cannot remove 1841 Bar and 1903 Interlock Pin on the worm box assembly, which means i cannot drop it out of the apron. This is the only part left on the apron now. I can slide the bar from side to side but not enough to be able to remove anything. All grub screws are out too. Would really appreciate some help from someone with experience.

Adam
20 April 2018 at 23:50 #350936
Muzzer
Participant
@muzzer
Take a look at these documents. The one called "Colchester Clausing manual" is a US manual that actually describes how to do stuff, rather than simply show an exploded view and a parts list. It's actually for a Bantam but the construction looks very similar, so perhaps it may help.

You probably just need a bigger hammer!

Murray

I see the "Notesto be readwithClausing" actually describes and shows it in the flesh. Looks pretty helpful.

Edited By Muzzer on 20/04/2018 23:57:24
21 April 2018 at 07:36 #350947
Stuart Bridger
Participant
@stuartbridger82290
There was article in MEW some time ago (sorry don't know which #) that described refurb of the auto feed trip on the Chipmaster. Don't remember much detail, but it was enough of a PITA to put me off trying it myself. I think that author indicated that the assembly wasn't designed to come apart!
21 April 2018 at 08:07 #350948
Adam
Participant
@adam
Thanks for the replies everyone. Muzzer, that helped a massive amount. There is a plug in the end which needs drilling out.
21 April 2018 at 13:07 #350989
Muzzer
Participant
@muzzer
Glad to hear that. Don't recall who gave me those docs but they have been very helpful to me too. All credit to them!

Murray
25 May 2020 at 10:46 #474745
Herman van der Merwe
Participant
@hermanvandermerwe76509
Thanks for the link to the files @Muzzer. I have added copies to the Bantam section of the Colchester group on Groups.io
25 May 2020 at 11:03 #474757
Alan Jackson
Participant
@alanjackson47790
Hi Adam,

In MEW No 187 John Connaghan describes how he dismantled and improved the fine feed knock off and dropped worm assembly. This will help you.

Alan

Edited By Alan Jackson on 25/05/2020 11:03:32
11 September 2023 at 00:04 #659813
PAUL SOMLO
Participant
@paulsomlo24876
The two bearings in the feed assembly and the worm gear – do those need to be greased upon assembly? There doesn't appear to be any way to get oil to them after assembly.
Author

Posts