Sounds very similar to schoolday metalwork class method. We used a commercially produced jollop, – "Kasenit" ?? Too long ago to be any more precise – we had Radio Caroline playing in workshop with The Animals singing "House of the Rising Sun".

I use the Beta compound from EKP also widely available elsewhere.

Will case hardening be enough for a scewdriver? More usual to use a carbon steel and through harden so the blade does not twist on the first tight screw you come across

The OP's original method won't work apart from what was said about overall strength of the core. The heat/dip/ process works with kasenit because it contains a cyanide derivative which decomposes to release active carbon that quickly penetrates the surface.
The traditional methods rely on plain carbon (charcoal) being in contact for a long time. This also runs the risk of burning off both the iron and the carbon so again traditionally methods were needed to prevent this. So items are put in a tin/iron pot /container that can be sort of sealed. Then calcium carbonate was added to the charcoal in the form of lime if available or bone which was typically also knocking around the blacksmiths, to decompose giving off CO2 which expelled the air before it was hot enough to burn any of the iron causing pitting or marking of the item. use of leather offcuts was just a mixture of folklore and deliberately making it seem like a 'special' process.

Who on earth would suggest making a screwdriver from mild steel and then case harden it?

Robert Butler

Hi Choochoo,

You might find some useful comments here:

https://www.model-engineer.co.uk/forums/postings.asp?th=64390

Regards,

Alan

To be equally pedantic, that's pack hardening. Any process that produces a hard skin and soft core is case hardening, and there are quite a few. When I were a lad heat treatment shops had vats of molten cyanide, it's a wonder anyone survived.

When I worked in an engineering factory they used molten cyanide in the Hardening House. 2 of us maintenance fitters were sent to change the pot. Started to chip away at the grout around the top edge. A piece flew off right onto my tongue. I spent quite a time spitting! The new cyanide tablets lay all over the floor and the blacksmith proudly told us one tablet in the local water tower would be enough to kill the population of the local town! Elf and Safety! Actually, some things have improved for the better. (Ps, I didn't die!)

Well, I learned, blacksmithing, that an iron box with a snug lid ( didn't need to be super sealed) packed with leather trimmings with the object in the center and heated to a bright yellow and held there for a couple of hours would put a nice case, about .020" thick on flint lock parts very well. Learned the method 50 years ago from a very skilled gunsmith. Large parts would obviously need large equipment of which I am quite naked.

Have fun, try things!

Pete

I plead 'not guilty' this time!

My Oxford English Dictionary dates first use of 'case-harden' in print to 1677 (which date is repeated in the Wikipedia article). Though iron-workers didn't know it at the time, the surface was hardened by carburisation, i.e encouraging carbon to diffuse into an Iron surface by heating the two in contact at about 2000°C for quite a long time.

Furnace fires are filthy. Carburisation occurs along with a lot of other undesirable chemistry that makes results unpredictable. Therefore a case was used to protect the job and the chemicals from corruption.

The case could be clay, but cast-iron became popular (because it's cheap), Wrought iron was recommended because it lasted longer, and Nichrome is used for precision hardening.

The original mix was sliced leather (a source of clean carbon), and it was soon discovered adding horn made it work more reliably. The horn provided Nitrogen. This combination is still recommended one of my books dating to about 1930, though they suggest buying a commercially consistent bagful rather than making your own. By 1948, chemical mixtures are recommended: charcoal and Potassium Ferricyanide and/or Barium Carbonate. In 1948 Barium Carbonate was preferred, I don't know if that's still true.

Technology marches on. An actual protective case was essential when furnaces were no more sophisticated than a heap of dubious fuel and a bellows. When clean heat became available and the science was understood, the need for a separate protective case diminished – in effect the furnace is the case!

As the original 'case-hardening' slid towards meaning 'any skin hardening process', it became necessary to invent new terms to cover several hardening processes; for example 'Pack Hardening' is now used to describe the original process using a sealed box.

English constantly shifts, and mechanical engineering might be worse than most. The year I left school, they threw out their collection of old technology text-books, and we were allowed to take our pick. Interesting because what boys were taught in 1933, had changed markedly by 1945, 1954 was different from both, and my 1960's learning had moved on again. In 1933 much attention paid to heat (steam), and optics (fresnel lighthouses), but no mention of atomic structure. 1960's no mention of steam engines, or light-houses, large chunks of old-fashioned chemical analysis had disappeared, replaced by orbitals, electrons, and physical chemistry. My children's textbooks were different again. The underlying science is much the same, but the emphasis is different. All that effort I put into learning how to make coal-gas and recover a multitude of useful organic chemicals by roasting coals was wasted! No surprise that the language we use varies over time. Best not to die in a ditch over it!

Choo-choos process is aimed at small workshops. It's conveniently easy rather than top-notch, producing an unpredictably thin hard layer. No box needed because it relies on a source of clean heat such as a blowlamp, and melting chemicals in the mix keep air out for long enough to get a reasonable result. Not to be compared with industrial hardening, where a thick layer of known depth is required, and the finished item has to meet a hardness specification. Choo-choo's mild-steel screwdriver will perform better after simple hardening, but it won't be anything like as hard wearing as a commercial screwdriver. An excellent learning opportunity rather than the best of all possible ways to make a screwdriver!

Dave

That's the first time I've seen the OED quoted as an authority on metallurgy. SOD's reference might well have been the only way in ancient times, (they also used bone dust, a byproduct of making buttons) but for a long time Fulmen's definition is correct

While working the plating shop as part of my training there was a process called Black Chrome.The parts were first Copper plated and immersed in what looked like boiling sawdust mixture. Upon removing the parts were then brushed to get the copper plating off, and up came a lustrious black chrome. I later learnt that Browning shotguns had black chrome barrels to prevent wear.

The application I saw was for the internal parts of large gun recuporators.