5/16 x 26 tpi brass bolt

5/16 x 26 tpi brass bolt

This topic has 8 replies, 6 voices, and was last updated 27 December 2021 at 21:50 by Former Member.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
27 December 2021 at 18:50 #577003
Former Member
Participant
@formermember12892
[This posting has been removed]
Advert

27 December 2021 at 18:50 #11065
Former Member
Participant
@formermember12892
27 December 2021 at 18:56 #577004
duncan webster 1
Participant
@duncanwebster1
Not a hope. Tracy tools sell dies if you can't screw cut it
27 December 2021 at 19:14 #577011
Former Member
Participant
@formermember12892
[This posting has been removed]
27 December 2021 at 19:17 #577012
Michael Gilligan
Participant
@michaelgilligan61133
It may be worth looking at this, From 2010 : **LINK**

https://www.model-engineer.co.uk/forums/postings.asp?th=36526

MichaelG.
27 December 2021 at 19:52 #577019
peak4
Participant
@peak4
Would a stainless or mild steel one one do? They will be available in Cycle Thread from one of the specialist motorcycle suppliers or someone such as Grove.
https://www.groveco.co.uk/contents/en-uk/d44.html
http://www.nookysnuts.com/aboutus/aboutus.html

On the other hand, could you use M8?

I've just been checking my dies and chasers, but unfortunately absent, or I'd have made you one.

Bill

Edited By peak4 on 27/12/2021 20:00:19
27 December 2021 at 20:56 #577034
Nick Welburn
Participant
@nickwelburn
Think I have that die, what is it you need? Might take me a little time to produce I’m not sure I’ve got any brass stock in.
27 December 2021 at 21:27 #577038
Harry Wilkes
Participant
@harrywilkes58467
Posted by Nick Welburn on 27/12/2021 20:56:34:

Think I have that die, what is it you need? Might take me a little time to produce I’m not sure I’ve got any brass stock in.

Nice one

H
27 December 2021 at 21:50 #577042
Former Member
Participant
@formermember12892
[This posting has been removed]
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- OKMO Microcosm Model M31 Vertical Steam Engine Single Cylinder with DIY Mods
  Started by: Blue Heeler in: Stationary engines
- 1
- 1
- 7 February 2025 at 01:07
  Blue Heeler
- How to identify a thread, ACME vs TR
  Started by: moonman in: Beginners questions
- 1
- 1
- 7 February 2025 at 00:16
  moonman
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 10
- 14
- 6 February 2025 at 23:40
  Nigel Graham 2
- What Do These Mean; Why So Many Loop Errors? (Alibre Atom)
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 3
- 6
- 6 February 2025 at 23:05
  Nigel Graham 2
- Parting off – Left over nib
  Started by: Blue Heeler in: Workshop Techniques
- 6
- 8
- 6 February 2025 at 22:54
  Blue Heeler
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 5
- 9
- 6 February 2025 at 22:46
  Nigel Graham 2
- Solid Edge – Spring Designer – Help! 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 7
- 28
- 6 February 2025 at 17:51
  SillyOldDuffer
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 3
- 4
- 6 February 2025 at 17:06
  zymurgy2289
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 13
- 16
- 6 February 2025 at 16:57
  Andrew Tinsley
- Lidl spray aerosol items 1 2
  Started by: Bootlegger Blacky in: Hints And Tips for model engineers
- 20
- 26
- 6 February 2025 at 16:53
  Mick B1
- Totally unacceptable treatment 1 2
  Started by: Me. in: General Questions
- 14
- 28
- 6 February 2025 at 15:49
  John Hinkley
- Changes to Well-Known Auction Site 1 2
  Started by: Chris Crew in: The Tea Room
- 21
- 28
- 6 February 2025 at 13:48
  Tony Pratt 1
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 9
- 25
- 6 February 2025 at 13:14
  JasonB
- Eastern European Steam
  Started by: parovoz in: Introduce Yourself – New members start here!
- 10
- 15
- 6 February 2025 at 12:40
  parovoz
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 79
- 6 February 2025 at 11:36
  SillyOldDuffer
- The most difficult project?
  Started by: Tony Martyr in: Stationary engines
- 5
- 15
- 6 February 2025 at 11:25
  Chris Gunn
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 334
- 6 February 2025 at 10:55
  Brian Abbott
- Small butane torch refilling.
  Started by: YouraT in: Workshop Tools and Tooling
- 13
- 19
- 6 February 2025 at 08:21
  Nicholas Farr
- Calling all Little John and other Raglan users
  Started by: David Senior in: General Questions
- 1
- 1
- 6 February 2025 at 07:17
  David Senior
- CNC mill on its stand
  Started by: Dave S in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 2
- 6 February 2025 at 06:54
  JasonB
- shopmade single flute end mill
  Started by: celso ari schlichting in: General Questions
- 4
- 4
- 6 February 2025 at 06:34
  Diogenes
- Pittler spiral cutting test
  Started by: vic newey in: Workshop Techniques
- 9
- 21
- 5 February 2025 at 20:16
  vic newey
- Pennsylvania A3 Switcher 1 2 3
  Started by: Mark Elen 1 in: Work In Progress and completed items
- 18
- 58
- 4 February 2025 at 17:52
  Mark Elen 1
- Taylor Hobson cutter grinder modificaton
  Started by: David George 1 in: Workshop Tools and Tooling
- 6
- 24
- 4 February 2025 at 17:50
  David George 1
- The wonders of AI… 1 2
  Started by: Robin Graham in: The Tea Room
- 15
- 42
- 4 February 2025 at 15:42
  Russell Eberhardt

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies