Hi,
I am going to make a myfordboy vertical boiler. It is 2.5" dia 5.5" long with a 22mm central flue. It has two bushes at the top and two in the side.
I have a Sievert Cyclone 3524 burner (3KW) and have CupAlloy 455 silver solder (low temp)
From what I have read I should do a two step braze. First the end caps and flue using a higher temp solder, then the bushes using a low temp solder.
My questions are;
Would a 3KW burner be hot enough to use a high temp solder?
Would it be possible to solder the whole boiler using low temp solder? i,e, do the bottom, then the top and its two bushings, and finally the side bushes.
Thanks
Adrian