Strange item on Boxford tailstock

Strange item on Boxford tailstock

This topic has 3 replies, 2 voices, and was last updated 15 February 2020 at 21:41 by Grindstone Cowboy.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
15 February 2020 at 21:08 #452411
Grindstone Cowboy
Participant
@grindstonecowboy
Been having a muck about with my newly acquired Boxford C (circa 1959 by the serial number), and found an odd little knurled knob on the top of the tailstock. It just lifts out of a blind hole and has a short rod with a flattened end.

I seem to recall hearing something about oil reservoirs so that you could apply a drop of cutting oil to your centre drill – is this what it is? Seems like you'd constantly be topping it up – it's not a particularly big hole. And I've not found any references to it on the Boxford parts lists either. I'm starting to suspect there may have been a number of design changes over the years, not all documented.
Advert

15 February 2020 at 21:08 #10078
Grindstone Cowboy
Participant
@grindstonecowboy
Is it for oil?
15 February 2020 at 21:29 #452416
John Baron
Participant
@johnbaron31275
Yes that is exactly what its for ! Actually the dead centre.

Edited By John Baron on 15/02/2020 21:30:25
15 February 2020 at 21:41 #452418
Grindstone Cowboy
Participant
@grindstonecowboy
Excellent, thanks for confirming it
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- ER vs Morse collets
  Started by: Sonic Escape in: Beginners questions
- 13
- 14
- 15 March 2025 at 10:46
  John Haine
- Tom senior LV
  Started by: Matt Smith in: Beginners questions
- 4
- 4
- 15 March 2025 at 10:45
  noel shelley
- Lowering heating bills
  Started by: old mart in: The Tea Room
- 6
- 7
- 15 March 2025 at 10:40
  John Haine
- Great find (7/8″ rock drill), but what alloy?
  Started by: Fulmen in: Materials
- 6
- 13
- 15 March 2025 at 10:38
  noel shelley
- Silver Soldering Boilers.
  Started by: ebeneezer in: Beginners questions
- 4
- 4
- 15 March 2025 at 10:28
  Dave Halford
- Coin of the Realm
  Started by: Michael Gilligan in: Materials
- 7
- 10
- 15 March 2025 at 10:00
  SillyOldDuffer
- Weldon arbor?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 6
- 11
- 15 March 2025 at 09:42
  Bo’sun
- Slow Again? 1 2 3
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 29
- 71
- 15 March 2025 at 08:49
  An Other
- What Did You Do Today 2025 1 2 3
  Started by: JasonB in: The Tea Room
- 19
- 55
- 14 March 2025 at 22:44
  bernard towers
- DC Wasp Rebuild
  Started by: William Chitham in: I/C Engines
- 3
- 4
- 14 March 2025 at 22:21
  Ramon Wilson
- Continuing the Television theme … 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 13
- 29
- 14 March 2025 at 21:32
  Nicholas Farr
- Forthcoming TV – ‘Masters of Invention’
  Started by: SillyOldDuffer in: Hints And Tips for model engineers
- 3
- 3
- 14 March 2025 at 19:51
  Mike Hurley
- Aircraft General Discussion 1 2 … 80 81
  Started by: John Olsen in: The Tea Room
- 207
- 2,013
- 14 March 2025 at 18:50
  Martin Connelly
- Air source heat pumps 1 2
  Started by: Plasma in: The Tea Room
- 16
- 30
- 14 March 2025 at 17:31
  Plasma
- Lathe cutting a taper
  Started by: Chris Mate in: Beginners questions
- 14
- 21
- 14 March 2025 at 16:32
  bernard towers
- Cheap MMA inverter (aka stick welder)?
  Started by: Fulmen in: Workshop Tools and Tooling
- 4
- 10
- 14 March 2025 at 15:49
  noel shelley
- NEW LOOK – Model Engineer & Workshop 1 2 … 7 8
  Started by: sohara in: Model Engineer & Workshop
- 56
- 176
- 14 March 2025 at 14:20
  mike robinson 2
- Good supplier of bandsaw blades please
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 11
- 11
- 14 March 2025 at 12:46
  Howard Lewis
- Where to get a lathe (Myford Super-7) re-ground??
  Started by: flatline in: Beginners questions
- 4
- 4
- 14 March 2025 at 12:34
  parovoz
- Where/How will you be watching ?
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 3
- 5
- 14 March 2025 at 12:24
  bernard towers
- Denford Triac Spindle Problem
  Started by: Richard Evans 2 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 7
- 14 March 2025 at 10:59
  John Haine
- Aluminium – yuck.
  Started by: Dave S in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 7
- 15
- 14 March 2025 at 10:03
  Julie Ann
- Razor Blade Sharpener
  Started by: Vic in: The Tea Room
- 7
- 8
- 14 March 2025 at 08:46
  Clive Foster
- Another Fobco Chuck
  Started by: spencerd72 in: Workshop Tools and Tooling
- 6
- 10
- 14 March 2025 at 00:32
  Pete
- 3/16″ lathe chuck key wanted
  Started by: Wink Hackman in: Workshop Tools and Tooling
- 11
- 14
- 13 March 2025 at 23:00
  duncan webster 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies